We propose and report on the design of a 1-D metallo-dielectric nano-grating on a GaAs substrate. We numerically study the impact of grating period, slit and wire widths, and irradiating angle of incidence on the optical response. The optimal wire width, w = 160 nm, was chosen based on previous results from investigations into the influence of wire width and nano-slit dimensions on optical and electrical enhancements in metal-semiconductor-metal photodetectors. In this present project, resonant absorption and reflection modes were observed while varying the wire and nano-slit widths to study the unique optical modes generated by Rayleigh-Wood anomalies and surface plasmon polaritons. We observed sharp and diffuse changes in optical response to these anomalies, which may potentially be useful in applications such as photo-sensing and photodetectors. Additionally, we found that varying the slit width produced sharper, more intense anomalies in the optical spectrum than varying the wire width.

This work investigates a new design for a plasmonic SERS biosensor via computational electromagnetic models. It utilizes a dual-width plasmonic grating design, which has two different metallic widths per grating period. These types of plasmonic gratings have shown larger optical enhancement than standard single-width gratings. The new structures have additional increased enhancement when the spacing between the metal decreases to sub-10 nm dimensions. This work integrates an oxide layer to improve the enhancement even further by carefully studying the effects of the substrate oxide thickness on the enhancement and reports ideal substrate parameters. The combined effects of varying the substrate and the grating geometry are studied to fully optimize the device’s enhancement for SERS biosensing and other plasmonic applications. The work reports the ideal widths and substrate thickness for both a standard and a dual-width plasmonic grating SERS biosensor. The ideal geometry, comprising a dual-width grating structure atop an optimal SiO2 layer thickness, improves the enhancement by 800%, as compared to non-optimized structures with a single-width grating and a non-optimal oxide thickness.

, "Modeling and optimization of Au-GaAs plasmonic nanoslit array structures for enhanced near-infrared photodetector applications," J. Nanophoton. 11(1), 016017 (2017), doi: 10.1117/1.JNP.11.016017. Abstract. This theoretical work explores how various geometries of Au plasmonic nanoslit array structures improve the total optical enhancement in GaAs photodetectors. Computational models studied these characteristics. Varying the electrode spacing, width, and thickness drastically affected the enhancement in the GaAs. Peaks in enhancement decayed as Au widths and thicknesses increased. These peaks are resonant with the incident near-infrared wavelength. The enhancement values were found to increase with decreasing electrode spacing. Additionally, a calculation was conducted for a model containing Ti between the Au and the GaAs to simulate the necessary adhesion layer. It was found that optical enhancement in the GaAs decreases for increasing Ti layer thickness. Optimal dimensions for the Au electrode include a width of 240 nm, thickness of 60 nm, electrode spacing of 5 nm, and a minimum Ti thickness. Optimal design has been shown to improve enhancement to values that are up to 25 times larger than for nonoptimized geometries and up to 300 times over structures with large electrode spacing. It was also found that the width of the metal in the array plays a more significant role in affecting the field enhancement than does the period of the array. © The Authors. Published by SPIE under aCreative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.

Plasmonic grating structures have been shown effective at increasing near-field optical enhancement. A doublewidth plasmonic grating design is introduced, where each period has two alternating metal widths separated by a nanogap. With this new design, analysis has shown that plasmonic resonances couple between each metal section, resulting in even greater optical enhancement compared with single-width gratings. The geometry that gives the greatest optical enhancement has been determined with a computational model. This work demonstrates that the increased enhancement is due to hybridized modes that couple between the two grating segments.