Porous metal structures have emerged as a promising solution in repairing and replacing damaged bone in biomedical applications. With the advent of additive manufacturing technology, fabrication of porous scaffold architecture of different unit cell types with desired parameters can replicate the biomechanical properties of the natural bone, thereby overcoming the issues, such as stress shielding effect, to avoid implant failure. The purpose of this research was to investigate the influence of cube and gyroid unit cell types, with pore size ranging from 300 to 600 µm, on porosity and mechanical behavior of titanium alloy (Ti6Al4V) scaffolds. Scaffold samples were modeled and analyzed using finite element analysis (FEA) following the ISO standard (ISO 13314). Selective laser melting (SLM) process was used to manufacture five samples of each type. Morphological characterization of samples was performed through micro CT Scan system and the samples were later subjected to compression testing to assess the mechanical behavior of scaffolds. Numerical and experimental analysis of samples show porosity greater than 50% for all types, which is in agreement with desired porosity range of natural bone. Mechanical properties of samples depict that values of elastic modulus and yield strength decreases with increase in porosity, with elastic modulus reduced up to 3 GPa and yield strength decreased to 7 MPa. However, while comparing with natural bone properties, only cube and gyroid structure with pore size 300 µm falls under the category of giving similar properties to that of natural bone. Analysis of porous scaffolds show promising results for application in orthopedic implants. Application of optimum scaffold structures to implants can reduce the premature failure of implants and increase the reliability of prosthetics.

No abstract

No abstract

No abstract

Biomaterials play a significant role in revolutionizing human life in terms of implants and medical devices. These materials essentially need to be highly biocompatible and inert to the human physiological conditions. This paper provides an in-depth, critical and analytical review on the previous research work and studies conducted in the field of metals and alloys used as implant materials including stainless steel, titanium and its alloys, cobalt chromium and others. Since the manufacturing of medical implants relies on selected grades of biomaterials, metals play a significant role in biomaterials market. This paper focuses on highlighting some basic principles of manufacturing implant materials underlying composition, structure and properties of these materials. Finally, attention is also given to the role of these implant materials on the betterment of human life in terms of their failures by critically analysing these materials.