A software-defined radio receiver is designed from a low-power ADC perspective, exploiting programmability of windowed integration sampler and clock-programmable discrete-time analog filters. To cover the major frequency bands in use today, a wideband RF front-end, including the low-noise amplifier (LNA) and a wide tuning-range synthesizer, spanning over 800 MHz to 6 GHz is designed. The wideband LNA provides 18-20 dB of maximum gain and 3-3.5 dB of noise figure over 800 MHz to 6 GHz. A low 1/f noise and high-linearity mixer is designed which utilizes the passive mixer core properties and provides around +70 dBm IIP2 over the bandwidth of operation.The entire receiver circuits are implemented in 90-nm CMOS technology. Programmability of the receiver is tested for GSM and 802.11g standards.

No abstract

A new wideband receiver architecture is proposed that employs two separate passive-mixer-based downconversion paths, which enables noise cancelling, but avoids voltage gain at blocker frequencies. This approach significantly relaxes the trade-off between noise, out-of-band linearity and wideband operation. The resulting prototype in 40 nm is functional from 80 MHz to 2.7 GHz and achieves a 2 dB noise figure, which only degrades to 4.1 dB in the presence of a 0 dBm blocker.

No abstract