Recently, foamed concrete has become a popular construction material that can be used in wide range of constructions application. Whilst the Rice Husk Ash (RHA) as agro-waste is contain high amount of silicon dioxide. RHA is produced in significant amount every year from agriculture countries. RHA has potential as a material to produce foamed concrete. In this research RHA has been used as a replacement for fine aggregate which used in construction as ordinary concrete material. In this study, foamed concrete with target density 1400, 1600 and 1800 kg/m3 has been produced. The compressive strength of foamed concrete with RHA has been tested. Concrete with Ratio 1:3 of RHA/Sand has higher compressive strength than ratios 3:1 and 2:2 of RHA/sand for every density. XRD and XRF test has been used to determinate chemical composition and crystalline structure of RHA. The result showed that RHA is an amorphous material which amorphous is important thing to pozzolanic process when hydration of cement paste. SEM and EDS test has been conducted to determine microstructure and chemical composition on microstructure of RHA foamed concrete. Amorphous RHA incorporating cement paste produces pozzolanic reaction. It is reduces the porosity and width of interfacial zone in such a way the density is increase.

Abstract. Foamed concrete as aerated concrete widely used in range of constructions application, no exception to structure shield. As structure shield is important to resist on impact loading. Whilst, Rice Husk Ash (RHA) as agro-waste potentials as filler for foamed concrete. RHA that is produced by uncontrolled burning under 700ºC during ± 6 hours obtain the granules contain the carbon and porous. The granules of RHA may fill the porous in matrix foamed concrete without remove the characteristic the foamed concrete its self as aerated concrete. This investigation RHA has been used as a replacement for fine aggregate. Target density 1800 kg/m 3 of foamed concrete both of with and without RHA have been produced to compare their strength and characteristic of impact resistance. SEM and EDS test has been conducted to determine microstructure and chemical composition of foamed concrete with RHA. The results showed that granules of RHA filled the porous and bonded with the denser part into matrix. The presence of granules of RHA has been changing the role of the air cell of porous in foamed concrete when it was subjected to impact loading. Also the granules of RHA give the foamed concrete denser without losing its characteristic of porous entirely.

Polypropylene Fibre (PF) as reinforcement has contributed to the intensity of Foamed Concrete (FC) slab when subjected to impact loading. The presence of PF in the admixture reduces the micro-porosity that generates the micro-crack of the slab. However, the fibrillation of PF in the admixture enhances the bonding mechanism system between PF and the FC matrix. The impact test conducted uses an instrumented drop-weight impact tower. Results show that FC without PF produces a distinct radial crack and clear fragments within the crater field unlike FC with PF. However, both slab materials did not generate spalling nor scabbing upon impact and the influence of porosity produces only local damage due to the mechanism of brittle crushing effect of porous walls. In this study, the energy absorption between FC with and without PF was investigated and from observation produces only minor differences. Results also verify that FC with PF did not loss its ability to absorb energy upon impact.

Abstract. Compressed Earth Brick (CEB) as building material has many advantages compared to conventional fired clay brick in the view of sustainability, moreover if incorporated uncontrolled burnt RHA waste that usually dumped off since it has no commercial value. This paper tried to assess the effect of soil types of clay and laterite in CEB properties which abundantly available in Malaysia. The result showed that the compressive strength of CEB with 20% RHA using clay at 5.5 MPa is better than that of laterite 4.9 MPa, and both exceed that of commercial unfired clay brick from UK.

This paper presents the blast loading of small scale soil barrier subjected to surface burst,analysed by using AUTODYN 2D and AUTODYN 3D.Results from the AUTODYN analyses are then compared with published experimental results. Good agreements with published experimental results are obtained for numerical analysis by using AUTODYN 3D for peak pressure at the front part of the barrier. In this case study, AUTODYN 2D numerical analyses provide higher pressure readingsat about 62% and 36% differences as compared with the published experimental results for pressure measurement at the middle front and back of soil barrier surface. The discrepancy of AUTODYN2D results was due to geometric dissimilarity from the actual experimental test. For complex geometries shape of barrier, that involves different shapes and configurations, three dimensional analyses are required to accurately predict the complex reflections and interactions associated with the propagation of the blast wave.