Improving oil production for high-salinity reservoirs using polymer flooding is challenging due to chemical and mechanical degradations. This study developed two biodegradable biopolymers based on graft copolymerization of guar gum (GG) with two different co-monomers, which are acrylamide (Am) and 2-acrylamido-2-methylpropane sulfonic acid (AMPS), and cross-linked by N,N ′-methylene bisacrylamide (MBA) to face these challenges. The newly synthesized guar gum-based hydrogels, GG- g -poly(Am-AMPS) (GH) and GG- g -poly(Am-AMPS)/Biochar (GBH composite), were evaluated as potential candidates for enhanced oil recovery (EOR) under high-salinity conditions. Fourier transform infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA) of the synthesized hydrogels were investigated, and their rheological properties were measured at room temperature. Both GH and GHB display a shear-thinning performance. In polymer flooding experiments, guar gum hydrogel (GH) and guar gum/biochar composite hydrogel (GHB) showed a remarkable influence on delaying the water breakthrough and proved to be effective biopolymers for enhanced oil recovery in high-salinity reservoirs. At the optimum concentration of 5 g/L, GH flooding achieved maximum oil recoveries of 70.53 and 72.11% in secondary and tertiary recovery processes, respectively. Meanwhile, the waterflooding process achieved an ultimate oil recovery of 58.42%. GHB flooding at optimum concentration, 2 g/L, increased the amount of oil recovery by 8.95% in tertiary recovery compared to waterflooding. Furthermore, GH (5 g/L) and GHB (2 g/L) slightly enhanced the rock water wettability as confirmed by contact angle measurements for GH and the relative permeability saturation curves for GH and GHB.

Currently, biomolecules flooding in the underground reservoirs acquires sustainable interest owing to their availability and eco-friendly properties. The current study reported chemical displacement by xanthan gum as well as xanthan/SiO2 and xanthan grafted with vinylsilane derivatives. Chemical characterization evaluated by traditional spectroscopic methods. Investigation of fluids response to reservoir environment assessed through rheological performance relative to shearing rate, ionic strength, and thermal stability. A sequence of flooding runs generated on 10 sandstone outcrops with different porosity and permeabilities. Core wetness assessed through relative permeability curves at different water saturation. The flooding tests indicate that grafting of the silica derivative overcome the shortage of xanthan solution in flooding operations relative to the reservoir conditions. The ability of the flooding solutions to alter rock wettability explored through relative permeability curves at different water saturation. The results reveal that the synthesized composite was a promised agent for enhancing oil recovery and profile conformance.

Water saturation assessment is recognized as one of the most critical aspects of formation evaluation, reserve estimation, and prediction of the production performance of any hydrocarbon reservoir. Water saturation measurement in a core laboratory is a time-consuming and expensive task. Many scientists have attempted to estimate water saturation accurately using well-logging data, which provides a continuous record without information loss. As a result, numerous models have been developed to relate reservoir characteristics with water saturation. By expanding the use and advancement of soft computing approaches in engineering challenges, petroleum engineers applied them to estimate the petrophysical parameters of the reservoir. In this paper, two techniques are developed to estimate the water saturation in terms of porosity, permeability, and formation resistivity index through the use of 383 data sets obtained from carbonate core samples. These techniques are the nonlinear multiple regression (NLMR) technique and the artificial neural network (ANN) technique. The proposed ANN model achieved outstanding performance and better accuracy for calculating the water saturation than the empirical correlation using NLMR and Archie equation with a high coefficient of determination (R 2) of 0.99, a low average relative error of 1.92, a low average absolute relative error of 13.62, and a low root mean square error of 0.066. To the best of our knowledge, the current research establishes a novel foundation using the ANN model in the estimation of water saturation.

No abstract

The world is gradually moving toward a severe energy crisis, with an ever-increasing demand for energy overstepping its supply. Therefore, the energy crisis in the world has shed important light on the need for enhanced oil recovery to provide an affordable energy supply. Inaccurate reservoir characterization may lead to the failure of enhanced oil recovery projects. Thus, the accurate establishment of reservoir characterization techniques is required to successfully plan and execute the enhanced oil recovery projects. The main objective of this research is to obtain an accurate approach that can be used to estimate rock types, flow zone indicators, permeability, tortuosity, and irreducible water saturation for uncored wells based on electrical rock properties that were obtained from only logging tools. The new technique is obtained by modifying the Resistivity Zone Index (RZI) equation that was presented by Shahat et al. by taking the tortuosity factor into consideration. When true formation resistivity (R t) and inverse porosity (1/Φ) are correlated on a log–log scale, unit slope parallel straight lines are produced, where each line represents a distinct electrical flow unit (EFU). Each line’s intercept with the y-axis at 1/Φ = 1 yields a unique parameter specified as the Electrical Tortuosity Index (ETI). The proposed approach was validated successfully by testing it on log data from 21 logged wells and comparing it to the Amaefule technique, which was applied to 1135 core samples taken from the same reservoir. Electrical Tortuosity Index (ETI) values show marked accuracy for representing reservoir compared with Flow Zone Indicator (FZI) values obtained by the Amaefule technique and Resistivity Zone Index (RZI) values obtained by the Shahat et al. technique, with correlation coefficients of determination (R 2) values equal to 0.98 and 0.99, respectively. Hence, by using the new technique, the Flow Zone Indicator, permeability, tortuosity, and irreducible water saturation were estimated and then compared with the obtained results from the core analysis, which showed a great match with the R 2-values of 0.98, 0.96, 0.98, and 0.99, respectively.