No abstract

No abstract

No abstract

By G. A. V. LEAF and AIDA M. F. SHETA I 'A theoretical expression for the initial shear modulus of a plain-woven fabric is derived and is then compared with the moduli of a range of woven fabrics.

Purpose The apparel industry is a labor-intensive industry, which depends mainly on the performance of the worker. The purpose of this study is to present an ergonomic redesign of the sewing machine workstation, with different sewing table heights and inclination angles, based on the operator’s anthropometric data. Design/methodology/approach A flexible ergonomic sewing table has been designed, four main workstation-setting factors were studied; sewing desk inclination angles – X_1, height – X_2, sewing machine type – X_3 and operator’s body mass index (BMI) – X_4, with three levels for each factor, except sewing machine type, which only has two levels. The study was undertaken to specify the limitations and advantages of each combination tested. Different measurement techniques were used; subjective information, production rates – P, working postures (head, neck and trunk inclination angles in the kinematic stage) were measured. Findings Sewing operators’ sitting posture angles in the kinematic stage were affected more or less by their anthropometric measurements and the type of sewing machine. These two factors should be taken into consideration when ergonomically redesigning the sewing machine workstation. Practical implications A new ergonomically redesigned sewing machine table can be incorporated into garment factories, taking into consideration the BMI of the operators to improve their productivity and reduce musculoskeletal disorder complaints due to incorrect operators’ posture. Originality/value An important correlation was found between the sewing operator’s anthropometric body measurement – BMI and the type of sewing machine (with significant R^2 = 0.8385 and 0.9764 with both the head and neck inclination angles O_H, O_N, respectively).