Iron tailings ponds are engineered dam and dyke systems used to capture iron tailings. They are high-risk hazards with high potential energy. If the tailings dam broke, it would pose a serious threat to the surrounding ecological environment, residents’ lives, and property. Rainfall is one of the most important influencing factors causing the tailings dam break. This paper took Chengde Area, a typical iron-producing area, as the study area, and proposed a remote sensing method to evaluate the safety risk of tailings ponds under rainfall condition by using runoff coefficient and catchment area. Firstly, the vegetation coverage in the study area was estimated using the pixel dichotomy model, and the vegetation type was classified by the support vector machine (SVM) method from Landsat 8 OLI image. Based on DEM, the slope of the study area was extracted, and the catchment area of the tailings pond was plotted. Then, taking slope, vegetation coverage, and vegetation type as three influencing factors, the runoff coefficient was constructed by weight assignment of each factor using analytic hierarchy process (AHP) model in both quantitative and qualitative way. Finally, the safety risk of tailings ponds was assessed according to average runoff coefficient and catchment area in the study area. The results showed that there were 124 low-risk tailings ponds, 16 moderate-risk tailings ponds, and 4 high-risk tailings ponds in the study area. This method could be useful for selecting targeted tailings ponds for focused safety monitoring. Necessary monitoring measurements should be carried out for the high-risk and moderate-risk tailings ponds in rainy season.

Chlorophyll is the dominant pigment in the photosynthetic light-harvesting complexes that is related to the physiological function of leaves and is responsible for light absorption and energy transfer. Dust pollution has become an environmental problem in many areas in China, indicating that accurately estimating chlorophyll content of vegetation using remote sensing for assessing the vegetation growth status in dusty areas is vital. However, dust deposited on the leaf may affect the chlorophyll content retrieval accuracy. Thus, quantitatively studying the dustfall effect is essential. Using selected vegetation indices (VIs), the medium resolution imaging spectrometer terrestrial chlorophyll index (MTCI), and the double difference index (DD), we studied the retrieval accuracy of chlorophyll content at the leaf scale under dusty environments based on a laboratory experiment and spectra simulation. First, the retrieval accuracy under different dustfall amounts was studied based on a laboratory experiment. Then, the relationship between dustfall amount and fractional dustfall cover (FDC) was experimentally analyzed for spectra simulation of dusty leaves. Based on spectral data simulated using a PROSPECT-based mixture model, the sensitivity of VIs to dust under different chlorophyll contents was analyzed comprehensively, and the MTCI was modified to reduce its sensitivity to dust. The results showed that (1) according to experimental investigation, the DD model provides low retrieval accuracy, the MTCI model is highly accurate when the dustfall amount is less than 80 g/m2, and the retrieval accuracy decreases significantly when the dustfall amount is more than 80 g/m2; (2) a logarithmic relationship exists between FDC and dustfall amount, and the PROSPECT-based mixture model can simulate the leaf spectra under different dustfall amounts and different chlorophyll contents with a root mean square error of 0.015; and (3) according to numerical investigation, MTCI’s sensitivity to dust in the chlorophyll content range of 25 to 60 μg/cm2 is lower than in other chlorophyll content ranges; DD’s sensitivity to dust was generally high throughout the whole chlorophyll content range. These findings may contribute to quantitatively understanding the dustfall effect on the retrieval of chlorophyll content and would help to accurately retrieve chlorophyll content in dusty areas using remote sensing.

Dust pollution is severe in some mining areas in China due to rapid industrial development. Dust deposited on the vegetation canopy may change its spectra. However, a relationship between canopy spectra and dust amount has not been quantitatively studied, and a pixel-scale condition for remote sensing application has not been considered yet. In this study, the dust dispersion characteristics in an iron mining area were investigated using the American Meteorological Society (AMS) and the U.S. Environmental Protection Agency (EPA) regulatory model (AERMOD). Further, based on the three-dimensional discrete anisotropic radiative transfer (DART) model, the spectral characteristics of vegetation canopy under the dusty condition were simulated, and the influence of dustfall on vegetation canopy spectra was studied. Finally, the dust effect on vegetation spectra at the canopy scale was extended to a pixel scale, and the response of dust effect on vegetation spectra at the pixel scale was determined under different fractional vegetation covers (FVCs). The experimental results show that the dust pollution along a haul road was more severe and extensive than that in a stope. Taking dust dispersion along the road as an example, the variation of vegetation canopy spectra increased with the height of dust deposited on the vegetation canopy. At the pixel scale, a lower vegetation FVC would weaken the influence of dust on the spectra. The results derived from simulation spectral data were tested using satellite remote sensing images. The tested result indicates that the influence of dust retention on the pixel spectra with different FVCs was consistent with that created with the simulated data. The finding could be beneficial for those making decisions on monitoring vegetation under dusty conditions and reducing dust pollution in mining areas using remote sensing technology.