The cyanation of chlorobenzene catalyzed by Ni(PPh3)n, which was generated in situ from NiBr2(PPh3)2–Zn–PPh3(Ni : Zn : P=1 : 3 : 2 molar ratio), was at first examined with various MCN (M=K, Na)–solvent systems by three procedures in order to clarify the conditions under which the reaction occurs. The effects of the systems and the procedures on the reaction were remarkable. It was observed that the cyanide ion has an inhibitory action on both the reduction of Ni(II) and the oxidative addition of the halide to Ni(0). However, when such MCN–dipolar aprotic solvent systems as KCN–HMPA, KCN or NaCN–MeCN, which give low cyanide concentrations, were used, the reaction readily took place at 50–60 °C without reducing Ni(II) prior to the addition of MCN and adding MCN slowly. Various Y-substituted chlorobenzenes, except for those with Y=o-Cl, o-CN, and m-NO2, were cyanated to give the corresponding nitriles in fair to good yields. NiBr2–PPh3 can be used in place of NiBr2(PPh3)2 if MCN is added after reduction. In addition, less reactive halides, such as o-dichlorobenzene and o-chlorobenzonitrile, were fairly smoothly cyanated by the use of NiBr2–1,1′-bis(diphenylphosphino)ferrocene.