Orientation and rupture of fractal colloidal gels during start-up of steady shear flow J. Rheol. 49, 657 (2005) AbstractThe transient response of model hard sphere glasses is examined during the application of steady rate start-up shear using Brownian dynamics simulations, experimental rheology and confocal microscopy. With increasing strain, the glass initially exhibits an almost linear elastic stress increase, a stress peak at the yield point and then reaches a constant steady state. The stress overshoot has a nonmonotonic dependence with Peclet number, Pe, and volume fraction, u, determined by the available free volume and a competition between structural relaxation and shear advection. Examination of the structural properties under shear revealed an increasing anisotropic radial distribution function, g(r), mostly in the velocity-gradient (xy) plane, which decreases after the stress peak with considerable anisotropy remaining in the steady-state. Low rates minimally distort the structure, while high rates show distortion with signatures of transient elongation. As a mechanism of storing energy, particles are trapped within a cage distorted more than Brownian relaxation allows, while at larger strains, stresses are relaxed as particles are forced out of the cage due to advection. Even in the steady state, intermediate super diffusion is observed at high rates and is a signature of the continuous breaking and reformation of cages under shear. V C 2016 The Society of Rheology.

Gallium and its alloys react with oxygen to form a native oxide that encapsulates the liquid metal with a solid "skin". The viscoelasticity of this skin is leveraged in applications such as soft electronics, 3D printing, and components for microfluidic devices. In these applications, rheological characterization of the oxide skin is paramount for understanding and controlling liquid metals. Here, we provide a direct comparison of the viscoelastic properties for gallium-based liquid metals and illustrate the effect of different subphases and addition of a dopant on the elastic nature of the oxide skin. The du Nouÿ ring method is used to investigate the interfacial rheology of oxide skins formed by galliumbased liquid metal alloys. The results show that the oxide layer on gallium, eutectic gallium−indium, and Galinstan are viscoelastic with a yield stress. Furthermore, the storage modulus of the oxide layer is affected by exposure to water or when small amounts of aluminum dopant are added to the liquid metals. The former scenario decreases the interfacial storage modulus of the gallium by 35−85% while the latter increases the interfacial storage modulus by 25−45%. The presence of water also changes the chemical composition of the oxide skin. Scanning electron microscopy, energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy suggest that a microstructural evolution of the interface occurs when aluminum preferentially migrates from the bulk to the surface. These studies provide guidance on selecting liquid metals as well as simple methods to optimize their rheological behavior for future applications.

We examine microstructural and mechanical changes which occur during oscillatory shear flow and reformation after flow cessation of an intermediate volume fraction colloidal gel using rheometry and Brownian Dynamics (BD) simulations. A model depletion colloid-polymer mixture is used, comprising of a hard sphere colloidal suspension with the addition of non-adsorbing linear polymer chains. Results reveal three distinct regimes depending on the strain amplitude of oscillatory shear. Large shear strain amplitudes fully break the structure which results into a more homogenous and stronger gel after flow cessation. Intermediate strain amplitudes densify the clusters and lead to highly heterogeneous and weak gels. Shearing the gel to even lower strain amplitudes creates a less heterogonous stronger solid. These three regimes of shearing are connected to the microscopic shear-induced structural heterogeneity. A comparison with steady shear flow reveals that the latter does not produce structural heterogeneities as large as oscillatory shear. Therefore oscillatory shear is a much more efficient way of tuning the mechanical properties of colloidal gels. Moreover, colloidal gels presheared at large strain amplitudes exhibit a distinct nonlinear response characterized largely by a single yielding process while in those presheared at lower rates a two step yield process is promoted due to the creation of highly heterogeneous structures.2