Background: Barbed suture use has become more popular as technology and materials have advanced. Minimal data exist regarding performance of the 2 commercially available products, V-LocTM and StratafixTM in tendon repairs. The purpose of this study was to compare gap resistance and ultimate tensile strength of both suture materials and nonbarbed suture in a porcine ex vivo model. Methods: Porcine flexor tendons were harvested and divided into 3 groups of 10 of varying suture material (3-0 PDS™, 3-0 V-V-Loc 180™, or 3-0 Stratafix™). A modified 4-strand cruciate technique was used to repair each tendon. Knotless repair was performed using barbed suture, whereas a buried 6-throw square knot was done using conventional suture. A servohydrolic tester was used for biomechanical testing of linear 2-mm gap resistance and maximum tensile strength. Results: No difference was found in 2-mm gap resistance among the 3 groups. No difference was found in ultimate tensile strength between V-Loc™ (76.0 ± 9.4 N) and Stratafix™ (68.1 ± 8.4 N) repairs, but the ultimate strength of the PDS™ control group (83.4 ± 10.0 N) was significantly higher than that of Stratafix™. Conclusions: Barbed (knotless) and nonbarbed suture repairs demonstrate equivalent 2-mm gap resistance. Stratafix™ repairs show slightly inferior performance to nonbarbed repairs in ultimate tensile strength, although this occurred at gap distances far beyond the 2-mm threshold for normal tendon gliding. Both barbed and nonbarbed 4-strand cruciate flexor tendon repairs may require peripheral repair to withstand physiologic loads.

Background: Advances in suture material and geometry have fueled interest in barbed suture tenorrhaphy. Theoretically, barbed suture allows better load distribution, smoother gliding under pulleys, and improved tendon blood flow. Minimal data exist on whether barbed tendon repair may benefit from supplementation by a peripheral stitch. The purpose of this study is to determine whether peripheral suture repair increases gap resistance in both conventional and barbed core repairs, increases maximum tensile strength, and fails before or after the core repair. Methods: Porcine flexor tendons were harvested and assigned randomly into 4 groups of 10 of varying suture constructs (3-0 PDS™ or 3-0 V-Loc 180™ core with or without peripheral 5-0 Vicryl™ repair). Core repairs were performed using a modified 4-strand cruciate repair. A servohydrolic tester was used for biomechanical testing of linear 2-mm gap resistance and maximum tensile strength. Results: Peripheral repair improved 2-mm gap resistance in all repairs, regardless of core suture type, conventional (173% increase) or barbed (204% increase). No change in the maximum tensile strength was found in either core suture type with peripheral repair. Peripheral repairs always failed before core repairs, at a significantly higher load of 74.2 ± 20.4 N in barbed versus 57.8 ± 12.2 N (P = .04) in conventional core repairs. Conclusions: The addition of peripheral repair improved gap resistance but not ultimate tensile strength in both conventional and barbed flexor tendon repairs in linear testing. The 4-strand cruciate flexor tendon repairs using barbed suture may require peripheral repair to withstand physiologic loads, as core repair alone using barbed suture was insufficient.