Smart textiles consist of discrete devices fabricated from—or incorporated onto—fibres. Despite the tremendous progress in smart textiles for lighting/display applications, a large scale approach for a smart display system with integrated multifunctional devices in traditional textile platforms has yet to be demonstrated. Here we report the realisation of a fully operational 46-inch smart textile lighting/display system consisting of RGB fibrous LEDs coupled with multifunctional fibre devices that are capable of wireless power transmission, touch sensing, photodetection, environmental/biosignal monitoring, and energy storage. The smart textile display system exhibits full freedom of form factors, including flexibility, bendability, and rollability as a vivid RGB lighting/grey-level-controlled full colour display apparatus with embedded fibre devices that are configured to provide external stimuli detection. Our systematic design and integration strategies are transformational and provide the foundation for realising highly functional smart lighting/display textiles over large area for revolutionary applications on smart homes and internet of things (IoT).

Nanoimprint lithography (NIL) was used to shape thin films of a ferroelectric copolymer of vinylidene fluoride and trifluoroethylene (PVDF-TRFE), using a variety of molding shapes and imprinting conditions. The morphology of the layers was characterized by atomic force microscopy (AFM), and preferential orientation of the crystallographic axes was monitored by infrared microspectroscopy; in addition, the local ferroelectric properties were obtained by piezoresponse force microscopy (PFM). When the sample is imprinted in its paraelectric phase in conditions leading to complete confinement, in cavities of size lower than the natural lamellar length observed in a continuous thin film, the crystallographic a axis aligns preferentially parallel to the substrate, and the crystalline lamellae are of significantly reduced length. These characteristics translate in a strongly decreased coercive field and accelerated ferroelectric switching, which is in part ascribed to the improved coupling between the electric field and the properly oriented dipole moments. When decreasing the confinement either by leaving a residual film connecting the nanopillars, or by increasing the lateral size of the nanopillars above the natural lamellar length, or by using line molds where confinement only exists in one direction, or by using continuous films, the preferential orientation becomes less visible and the lamellar length increases, resulting in increased coercive and switching fields. Interestingly, the average length of the crystalline lamellae tends to correlate with the value of the coercive field. Finally, if the sample is imprinted in the melt, a flat-on setting of the crystalline lamellae ensues, with a vertical chain axis which is unfavorable for ferroelectric properties probed with a vertical electric field.

No abstract

We demonstrate the design of a multifunctional organic layer by the rational combination of nanosized regions of two functional polymers. Instead of relying on a spontaneous and random phase separation process or on the tedious synthesis of block copolymers, the method involves the nanomolding of a first component, followed by the filling of the resulting open spaces by a second component. We apply this methodology to fabricate organic nonvolatile memory diodes of high density. These are built by first creating a regular array of ferroelectric nanodots by nanoimprint lithography, followed by the filling of the trenches separating the ferroelectric nanodots with a semiconducting polymer. The modulation of the current in the semiconductor by the polarization state of the ferroelectric material is demonstrated both at the scale of a single semiconductor channel and in a microscopic device measuring about 80,000 channels in parallel, for voltages below ca. 2 V. The fabrication process, which combines synergetically orthogonal functional properties with a fine control over their spatial distribution, is thus demonstrated to be efficient over large areas.

Electro‐active polymers (EAPs) such as P(VDF‐TrFE‐CTFE) are greatly promising in the field of flexible sensors and actuators, but their low dielectric strength driven by ionic conductivity is a main concern for achieving high electrostrictive performance. It is well known that there is a quadratic dependence of the strain response and mechanical energy density on the applied electric field. This dependence highlights the importance of improving the electrical breakdown EAPs while reducing the dielectric losses. This article demonstrates that it is possible to dramatically increase the electrical breakdown and decrease the dielectric losses by controlling processing parameters of the polymer synthesis and fabrication procedure. As a result, an enhancement of around 70% is achieved in both the strain and blocking force. The effects on the dielectric losses of the polymer crystallinity, molecular weight, solvent purity, and crystallization temperature are also investigated. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018, 56, 1164–1173