SummaryIn this paper a detailed discussion is presented of the factors that affect the fluorescence lifetime imaging performance of a scanning microscope equipped with a single photon counting based, two-to eight-channel, time-gated detection system. In particular we discuss the sensitivity, lifetime resolution, acquisition speed, and the shortest lifetimes that can be measured. Detection systems equipped with four to eight time-gates are significantly more sensitive than the two timegate system. Only minor sensitivity differences were found between systems with four or more time-gates. Experiments confirm that the lifetime resolution is dominated by photon statistics. The time response of the detector determines the shortest lifetimes that can be resolved; about 25 ps for fast MCP-PMTs and 300-400 ps for other detectors. The maximum count rate of fast MCP-PMTs, however, is 10-100 times lower than that of fast PMTs. Therefore, the acquisition speed with MCP-PMT based systems is limited. With a fast PMT operated close to its maximum count rate we were able to record a fluorescence lifetime image of a beating myocyte in less than one second.

Single Molecule Localization super-resolution Microscopy (SMLM) has become a powerful tool to study cellular architecture at the nanometer scale. In SMLM, single fluorophore labels are made to repeatedly switch on and off (“blink”), and their exact locations are determined by mathematically finding the centers of individual blinks. The image quality obtainable by SMLM critically depends on efficacy of blinking (brightness, fraction of molecules in the on-state) and on preparation longevity and labeling density. Recent work has identified several combinations of bright dyes and imaging buffers that work well together. Unfortunately, different dyes blink optimally in different imaging buffers, and acquisition of good quality 2- and 3-color images has therefore remained challenging. In this study we describe a new imaging buffer, OxEA, that supports 3-color imaging of the popular Alexa dyes. We also describe incremental improvements in preparation technique that significantly decrease lateral- and axial drift, as well as increase preparation longevity. We show that these improvements allow us to collect very large series of images from the same cell, enabling image stitching, extended 3D imaging as well as multi-color recording.

No abstract

A fast fluorescence lifetime imaging (FLIM) system is developed that can acquire images at a rate of hundreds of frames per second. The FLIM system is based on a wide-field microscope equipped with a time-gated intensified CCD detector and a pulsed laser. The time-gated detector acquires the signals from two time gates simultaneously and is therefore insensitive to movements of the specimen and photo-bleaching. The system is well suited for quantitative biological FLIM experiments and its performance is evaluated in calcium imaging experiments on beating neonatal rat myocytes. Several calcium sensitive dyes are characterized and tested for their suitability for fast FLIM experiments: Oregon Green Bapta-1 (OGB1), Oregon Green Bapta-2 (OGB2), and Oregon Green Bapta-5N (OGB5N). Overall the sensitivity range of these dyes is shifted to low calcium concentrations when used as lifetime dyes. OGB1 and OGB2 behave very similarly and can be used for FLIM-based calcium imaging in the range 1 to approximately 500 nM and OGB5N can be used up to 3 microM. The fast FLIM experiments on the myocytes could be carried out at a 100-Hz frame rate. During the beating of the myocytes a lifetime change of about 20% is observed. From the lifetime images a rest calcium level of about 65 nM is found.

A fast time-domain based fluorescence lifetime imaging (FLIM) microscope is presented that can operate at frame rates of hundreds of frames per second.A beam splitter in the detection path of a wide-field fluorescence microscope divides the fluorescence in two parts. One part is optically delayed with respect to the other. Both parts are viewed with a single time-gated intensified CCD camera with a gate width of 5 ns. The fluorescence lifetime image is obtained from the ratio of these two images.The fluorescence lifetime resolution of the FLIM microscope is verified both with dye solutions and fluorescent latex beads. The fluorescence lifetimes obtained from the reference specimens are in good agreement with values obtained from time correlated single photon counting measurements on the same specimens.The acquisition speed of the FLIM system is evaluated with a measurement of the calcium fluxes in neonatal rat myocytes stained with the calcium probe Oregon Green 488-Bapta. Fluorescence lifetime images of the calcium fluxes related to the beating of the myocytes are acquired with frame rates of up to 100 Hz.