An earthquake doublet (Mw 7.8 and Mw 7.6) occurred on the East Anatolian Fault Zone (EAFZ) on February 6th, 2023. The events produced significant ground motions and caused major impacts to life and infrastructure throughout SE Türkiye and NW Syria. Here we show the results of earthquake relocations of the first 11 days of aftershocks and rupture models for both events inferred from the kinematic inversion of HR-GNSS and strong motion data considering a multi-fault, 3D geometry. We find that the first event nucleated on a previously unmapped fault before transitioning to the East Anatolian Fault (EAF) rupturing for ~350 km and that the second event ruptured the Sürgü fault for ~160 km. Maximum rupture speeds were estimated to be 3.2 km/s for the Mw 7.8 event. For the Mw 7.6 earthquake, we find super-shear rupture at 4.8 km/s westward but sub-shear eastward rupture at 2.8 km/s. Peak slip for both events were as large as ~8m and ~6m, respectively.

An earthquake doublet (Mw 7.8 and Mw 7.6) occurred on the East Anatolian Fault Zone (EAFZ) on February 6th, 2023. The events produced significant ground motions and caused major impacts to life and infrastructure throughout SE Türkiye and NW Syria. Here we show the results of earthquake relocations of the first 11 days of aftershocks and rupture models for both events inferred from the kinematic inversion of HR-GNSS and strong motion data considering a multi-fault, 3D geometry. We find that the first event nucleated on a previously unmapped fault before transitioning to the East Anatolian Fault (EAF) rupturing for ~ 350 km and that the second event ruptured the Sürgü fault for ~ 160 km. Maximum rupture speeds were estimated to be 3.2 km/s for the Mw 7.8 event. For the Mw 7.6 earthquake, we find super-shear rupture at 4.8 km/s westward but sub-shear eastward rupture at 2.8 km/s. Peak slip for both events were as large as ~8m and ~6m, respectively.

The 6 February 2023 Mw 7.8 Pazarcık and subsequent Mw 7.5 Elbistan earthquakes generated strong ground shaking that resulted in catastrophic human and economic loss across south-central Türkiye and northwest Syria. The rapid characterization of the earthquakes, including their location, size, fault geometries, and slip kinematics, is critical to estimate the impact of significant seismic events. The U.S. Geological Survey National Earthquake Information Center (NEIC) provides real-time monitoring of earthquakes globally, including rapid source characterization and impact estimates. Here, we describe the seismic characterization products generated and made available by the NEIC over the two weeks following the start of the earthquake sequence in southeast Türkiye, their evolution, and how they inform our understanding of regional seismotectonics and hazards. The kinematics of rupture for the two earthquakes was complex, involving multiple fault segments. Therefore, incorporating observations from rupture mapping was critical for characterizing these events. Dense local datasets facilitated robust source characterization and impact assessment once these observations were obtained and converted to NEIC product input formats. We discuss how we may improve the timeliness of NEIC products for rapid assessment of future seismic hazards, particularly in the case of complex ruptures.

Nowadays, Global Navigation Satellite Systems (GNSS) data are used in most of the geodetic studies. Positioning information can be obtained by using GPS, GLONASS, Galileo and BeiDou in the structure of the GNSS. International GNSS Service (IGS) has initiated a project, called Multi-GNSS Experiment (MGEX), to collect, track and analyze different signals and satellite system data. Since, the Multi-GNSS solutions have started to use, positioning accuracy obtained from Multi-GNSS solutions is very important for users. Therefore, in this study, GNSS data of 10 stations were analyzed in 4 different scenarios as GPS, GPS/GLONASS, GPS/GLONASS/Galileo and GPS/GLONASS/Galileo/BeiDou. The GNSS data were processed using Trimble RTX service which is a web based precise point positioning (PPP) software that is capable of processing Multi-GNSS data. Results have demonstrated that, it has been shown that the higher positioning accuracy can be obtained using different satellite systems together, instead of using GPS-Only. Moreover, accuracy of Multi-GNSS solutions was investigated whether it depends on session duration and latitude or not. According to the results, it was emphasized that accuracy of Multi-GNSS solutions only depends on session duration.

No abstract