No abstract

ReuseUnless indicated otherwise, fulltext items are protected by copyright with all rights reserved. The copyright exception in section 29 of the Copyright, Designs and Patents Act 1988 allows the making of a single copy solely for the purpose of non-commercial research or private study within the limits of fair dealing. The publisher or other rights-holder may allow further reproduction and re-use of this version -refer to the White Rose Research Online record for this item. Where records identify the publisher as the copyright holder, users can verify any specific terms of use on the publisher's website. TakedownIf you consider content in White Rose Research Online to be in breach of UK law, please notify us by emailing eprints@whiterose.ac.uk including the URL of the record and the reason for the withdrawal request.Robot mapping and localisation in metal water pipes using hydrophone induced vibration and map alignment by dynamic time warping* Abstract-Water is a highly valuable resource so asset management of associated infrastructure is of critical importance. Water distribution pipe networks are usually buried, and so are difficult to access. Robots are therefore appealing for performing inspection and detecting damage to target repairs. However, robot mapping and localisation of buried water pipes has not been widely investigated to date, and is challenging because pipes tend to be relatively featureless. In this paper we propose a mapping and localisation algorithm for metal water pipes with two key novelties: the development of a new type of map based on hydrophone induced vibration signals of metal pipes, and a mapping algorithm based on spatial warping and averaging of dead reckoning signals used to calibrate the map (using dynamic time warping). Localisation is performed using both terrain-based extended Kalman filtering and also particle filtering. We successfully demonstrate and evaluate the approach on a combination of experimental and simulation data, showing improved localisation compared to dead reckoning.

This paper presents a review of algorithmic transforms called High Level Transforms for IBM, Intel and ARM SIMD multi-core processors to accelerate the implementation of low level image processing algorithms. We show that these optimizations provide a significant acceleration. A first evaluation of 512-bit SIMD XeonPhi is also presented. We focus on the point that the combination of optimizations leading to the best execution time cannot be predicted, and thus, systematic benchmarking is mandatory. Once the best configuration is found for each architecture, a comparison of these performances is presented. The Harris points detection operator is selected as being representative of low level image processing and computer vision algorithms. Being composed of five convolutions, it is more complex than a simple filter and enables more opportunities to combine optimizations. The presented work can scale across a wide range of codes using 2D stencils and convolutions.

Abstract-Water, a valuable resource, is usually distributed through urban environments by buried pipes. These pipes are difficult to access for inspection, maintenance and repair. This makes in-pipe robots an appealing technology for inspecting water pipes and localising damage prior to repair from above ground. Accurate localisation of damage is of critical importance because of the costs associated with excavating roads, disrupting traffic and disrupting the water supply. The problem is that pipes tend to be relatively featureless making robot localisation a challenging problem. In this paper we propose a novel simultaneous localisation and mapping (SLAM) algorithm for metal water pipes. The approach we take is to excite pipe vibration with a hydrophone (sound induced vibration), which leads to a map of pipe vibration amplitude over space. We then develop a SLAM algorithm that makes use of this new type of map, where the estimation method is based on the RaoBlackwellised particle filter (RBPF), termed PipeSLAM. The approach is also suited to SLAM in plastic water pipes using a similar type of map derived from ultrasonic sensing. We successfully demonstrate the feasibility of the approach using a combination of experimental and simulation data.

Abstract-Shape and mechanical structure of instruments play a large part in the lack of ergonomics during laparoscopic surgery. Providing intra-abdominal mobility and rethinking handles design are two solutions to increase comfort and precision of gestures. Based on previous work that determined the optimal intra-abdominal kinematics, this study analyses the influence of handle design on both gesture and ergonomic performance. A virtual reality laparoscopic simulator was developed to perform an experimental comparison between two novel robotized instruments and standard ones. A group of 10 surgeons and 6 researchers in robotics carried out two representative surgical tasks with each instrument. Based on instrument and arm segments tracking, a gesture performance index and an ergonomic performance index were computed. The study demonstrates that distal mobilities combined with improved handle design and integration increase ergonomic level during laparoscopy and facilitate complex gestures.