Flexible and printed perovskite solar cells (PSCs) fabricated on lightweight plastic substrates have many excellent potential applications in emerging new technologies including wearable and portable electronics, the internet of things, smart buildings, etc. To fabricate flexible and printed PSCs, all of the functional layers of devices should be processed at low temperatures. Tin oxide is one of the best metal oxide materials to employ as the electron transport layer (ETL) in PSCs. Herein, the synthesis and application of SnO2 quantum dots (QDs) to prepare the ETL of flexible and printed PSCs are demonstrated. SnO2 QDs are synthesized via a solvothermal method and processed to obtain aqueous and printable ETL ink solutions with different QD concentrations. PSCs are fabricated using a slot-die coating method on flexible plastic substrates. The solar cell performance and spectral response of the obtained devices are characterized using a solar simulator and an external quantum efficiency measurement system. The ETLs prepared using 2 wt% SnO2 QD inks are found to produce devices with a high average power conversion efficiency (PCE) along with a 10% PCE for a champion device. The results obtained in this work provide the research community with a method to prepare fully solution-processed SnO2 QD-based inks that are suitable for the deposition of SnO2 ETLs for flexible and printed PSCs.

Perovskite solar cells, prepared by using solution-processed printing techniques, gained much attention over the past few years and a considerable progress has been achieved in improving the power conversion efficiencies of these devices. Nevertheless, there are still some advancements that can be implemented, especially in terms of passivation of surface defects in the perovskite photoactive layer. Passivation can afford considerable reduction in surface recombination of charge carriers in the photoactive layer and help to obtain devices with better performance. In this work, poly(3-hexylthiophene-2,5-diyl)-based inks with small amount of pyridine as an additive are used to deposit the hole transport layer and simultaneously passivate the surface defects of the perovskite layer in flexible and printed perovskite solar cells. The devices are fabricated on flexible conductive plastic substrates using a slot-die coating method. It is found that 2.5 wt.% pyridine-containing inks for preparing hole transport layer have a positive effect on the performance of resulting perovskite solar cells. On average, around 13% improvement in the power conversion efficiency is observed for the devices with passivation as opposed to the reference devices without passivation. The effect of pyridine passivation on the structural and electronic properties of the perovskite layer on a flexible substrate is studied using experimental and analytical techniques, whereas the computer simulation methods are employed to rule out the possible mechanisms for the performance improvements in the devices with passivation. The approach presented here can be useful for developing simplified protocols for printing of flexible perovskite solar cells with the passivated perovskite layer and improved device efficiency.