Impedance data in 0.1 M sodium sulfate electrolyte show that the charge-transfer resistance of the modified copper reaches an inhibition efficiency of 97 %.

No abstract

The International Simple Glass (ISG) is considered as reference benchmark glass and is used in the frame of an international collaboration for the study of the dissolution mechanisms of high-level vitrified nuclear waste. In this work the forward dissolution rate of the ISG was determined in different alkaline solutions, as a simulation of the disposal conditions foreseen by the Belgian concept for geological disposal of vitrified waste. The determination of the forward dissolution rate was done by measuring the Si released from the glass in solution in tests performed at 30 °C in four different KOH solutions with pH varying from 9 to 14 and in artificial cementitious water at pH 13.5. The forward dissolution rates determined for the ISG in high pH solutions are in good agreement with the results obtained for a lower pH range. The rates obtained in this study, moreover, were compared with the rates measured in the same conditions for SON68 glass from a previous work. The values obtained for the two glasses are comparable in artificial cementitious water and in KOH at moderately alkaline pH. At higher pH, ISG glass shows a lower forward dissolution rate with respect to SON68 (0.20 g·m -2 ·d for ISG and 0.35 g·m -2 d for SON68 at pH 14).

Carboxylic acids and sodium carboxylates are used to protect metals against aqueous and atmospheric corrosion. In this paper we describe the application of a layer of copper carboxylate on the surface of a copper electrode by means of cyclic voltammetry technique, and tests which measure the corresponding resistance to aqueous corrosion. Unlike the soaking process, which also forms a film on the surface, the use of cyclic voltammetry allows one to follow the deposition process of the copper carboxylates onto the electrode. The modified electrodes have been characterized with infrared spectroscopy. In addition the corrosion resistance of the film has been investigated using polarization resistance and Tafel plot measurements

No abstract