Medium manganese steels are a grade of the third generation of advanced high strength steels (AHSS) that combine ductility, high strength and toughness for crashing resistance, determining characteristics for application in the automotive industry. During processing these steels are subjected to a hot and cold rolling followed by intercritical annealing in the field of austenite and ferrite phases. On the other side, the warm rolling processing is capable to reduce costs and operating time due to a single operation. The aim of this work was to follow, along warm rolling, the microstructure evolution. This aim was realized by optical and scanning electron microscopy analysis, X-ray diffraction, Vickers microhardness and EBSD technique in an 8Mn-0.08C steel. A very refined and deformed microstructure in warm-rolled condition was obtained, with a higher volume fraction of retained austenite without hot-rolled as previous processing step, which result in high tensile strength and total elongation. The texture shows a greater intensity of the α-fiber components as a function of higher strain in this thermomechanical processing.

Medium manganese steel is typically fabricated from hot-rolling followed by cold-rolling and intercritical annealing processes. However, a singular process, warm-rolling, is an appealing prospect. The microstructure, mechanical properties and texture of a 8 wt-% Mn–0.08 wt-% C steel was investigated by cold-rolling followed by intercritical annealing or warm-rolling. The product from both processes exhibited a highly refined microstructure as well as a large volume fraction of austenite. However, a slightly larger volume fraction as well as a more heterogeneous austenite morphology resulted from the warm-rolling process, associated with a higher work-hardening rate. Microstructural analysis revealed intense α-fibre components due to a higher strain following the warm-rolling process as well as a considerably high-angle grain boundary number which was associated with dislocation accumulation. This paper is part of a Thematic Issue on Medium Manganese Steels.

No abstract

Duplex stainless steel (DSS) has been considered as an excellent alternative for applications where high corrosion resistance and high mechanical strength are required. Therefore, microstructure and properties of DSS remain topics of much interest. For this purpose, the effect of warm-rolling was studied in a duplex stainless steel. The focus of this work was 2205 which is one of the most useful type of DSS. Although evolution of microstructure, texture and tensile properties during warm rolling of DDS have been reported, there is no study on the effect of warm rolling on corrosion resistance of 2205 DSS. In this context, the objective of this work is to evaluate microstructure, texture and mechanical and corrosion properties of UNS S32205 DSS after warm rolling. The duplex stainless steel was warm-rolled at 600°C up to 60 and 80% thickness reduction and submitted to electrochemical tests. The electrochemical behaviour of warm-rolled 2205 in the chlorine ion environment was evaluated using cyclic potentiodynamic polarization (CPP) and electrochemical impedance spectroscopy (EIS). The samples exhibited an excellent corrosion resistance in 3.5% NaCl solution. The study showed that the thermomechanical treatment used favoured the formation of the passive film and led to a greater polarization resistance. This behaviour is consistent with the pits density observed by scanning electron microscopy (SEM) and the crystallographic microtexture of the steel.

Abstract