Abstract:In this study, screw and nail withdrawal resistance of fir (Abies nordmanniana), oak (Quercus robur L.) black pine (Pinus nigra Arnold) and Stone pine (Pinus pinea L.) wood were determined and compared. The data represent the testing of withdrawal resistance of three types of screws as smart, serrated and conventional and common nails. The specimens were prepared according to TS 6094 standards. The dimensions of the specimens were 5x5x15cm and for all of the directions. Moreover, the specimens were conditioned at ambient room temperature and 65±2% relative humidity. The screws and nails were installed according to ASTM-D 1761 standards. Nail dimensions were 2.5mm diameter and 50 mm length, conventional screws were 4x50mm, serrated screws were 4x45mm and smart screws were 4x50mm. Results show that the maximum screw withdrawal resistance value was found in Stone pine for the serrated screw. There were no significant differences between Stone pine and oak regarding screw withdrawal resistance values. Conventional screw yielded the maximum screw withdrawal resistance value in oak, followed by Stone pine, black pine and fir. Oak wood showed the maximum screw withdrawal resistance value for the smart screw, followed by Stone pine, black pine, and fir. Oak wood showed higher nail withdrawal resistances than softwood species. It was also determined that oak shows the maximum nail withdrawal resistance in all types. The nail withdrawal resistances at the longitudinal direction are lower with respect to radial and tangential directions.

The difficult cultivation of the saffron plant (Crocus Sativus L.) make the spice of the same name made from its dried stigmas very valuable. It is estimated that some 75,000 blossoms or 225,000 hand-picked stigmas are required to make a single pound of saffron, which explains why it is the world’s most expensive spice. The aim of this study was to identify ways of increasing the fertility and production of saffron. For this purpose, the treatment of saffron bulbs with a synthetic growth hormone – a mixture of Polystimulins A6 and K – and two different microorganism based materials – biohumus or vermicompost and Effective Microorganisms™ (EM) – in four different ways (hormone alone, biohumus alone, EM alone and EM+biohumus) was investigated to determine whether these treatments have any statistically meaningful effects on corms and stigmas. It has been shown that EM + biohumus was the most effective choice for improved saffron cultivation.

No abstract

The selection of location is vital for a timber factory to keep on functioning. It is a signifi cant decision during the setup of a business and the preparation of projects. Therefore, dual scaling method often used for selecting the timber factory location and Analytic Hierarchy Process (AHP) have been used in this study. While the AHP method and the double weighing method were previously used separately, the aim of this study was to use these two studies together in order to obtain more reliable results. For this purpose, in the Western Black Sea region of Turkey, fi ve different candidate cities were selected for the establishment of a factory site for timber production: Bartin, Bolu, Kastamonu, Karabük and Zonguldak. At the same time, a total of ten factors including raw materials, labor, market, construction costs, energy and fuel, water, transportation, tax, security and social environment were determined. As a result of the study, the hybrid method, which is based on the average of both methods, yielded more reliable results.

No abstract