The ability to control the properties of bio-inspired liquid-infused surfaces is of interest in a wide range of applications. Liquid layers created using oil-infused polydimethylsiloxane elastomers offer a potentially simple way of accomplishing this goal through the adjustment of parameters such as curing agent ratio and oil viscosity. In this work, the effect of tuning these compositional parameters on the properties of the infused polymer are investigated, including infusion dynamics, stiffness, longevity in the face of continuous liquid overlayer removal, and resistance to bacterial adhesion. It is found that that curing agent concentration appears to have the greatest impact on the functionality of the system, with a lower base-to-curing agent ratio resulting in both increased longevity and improved resistance to adhesion by Escherichia coli. A demonstration of how these findings may be implemented to introduce patterned wettability to the surface of the infused polymers is presented by controlling the spatial arrangement of bacteria. These results demonstrate a new degree of control over immobilized liquid layers and will facilitate their use in future applications.

Tissue engineering using whole, intact cell sheets has shown promise in many cell-based therapies. However, current systems for the growth and release of these sheets can be expensive to purchase or difficult to fabricate, hindering their widespread use. Here, we describe a new approach to cell sheet release surfaces based on silicone oil-infused polydimethylsiloxane. By coating the surfaces with a layer of fibronectin (FN), we were able to grow mesenchymal stem cells to densities comparable to those of tissue culture polystyrene controls (TCPS). Simple introduction of oil underneath an edge of the sheet caused it to separate from the substrate. Characterization of sheets post-transfer showed that they retain their FN layer and morphology, remain highly viable, and are able to grow and proliferate normally after transfer. We expect that this method of cell sheet growth and detachment may be useful for low-cost, flexible, and customizable production of cellular layers for tissue engineering.