In this paper, we demonstrate a nanofiber patterning technique using field-enhanced electrospinning. Polyethylene oxide (PEO) nanofibers were electrospun on an elastomeric substrate with gold-coated pyramidal protrusions with the majority of fibers being deposited at the tips. The deposited nanofiber spots ranged from 8 x 8 microm(2) to 60 x 60 microm(2) in size, uniformly covering an area of 5 x 10 mm(2). Our experiments also indicate that nanofiber pattern selectivity is highly dependent on the separation/size ratio of the pyramidal protrusions with a ratio of <1, resulting in a superior selectivity.

In this paper, we demonstrate the effect of electrodynamic focusing through a gold-coated PDMS shadow mask on the selective deposition of electrospun nanofibers. Under a suitable applied voltage, the PDMS mask repels the fibers from its surface while simultaneously forcing them into micron-sized holes and onto a collecting substrate. The presented technique is simple and can be used to produce lithographic-scale nanofiber deposition using a wide range of materials.

In this technical note, we demonstrate a squeeze-film based spacer-free method for creating controllable submicrometer hydrogel films on planar substrates that can be used to photolithographically fabricate hydrogel microstructures. This new technique improves the photolithographic resolution and yield by providing a uniform and low-defect hydrogel film. The optimum polymerization initiation time for achieving such a layer was determined to be around 1 min. For patterning, the dried hydrogel film was coated with a parylene-C masking layer. Subsequent etching in oxygen plasma was used to transfer selected patterns of hydrogel to the substrate in a batch scale.