A Nd:YAG rod single-frequency ring laser based on side-pumped commercial modules is presented. Thermally induced birefringence compensation was applied in a dynamically stable resonator providing 55.6 W of continuous, linearly polarized, TEM00 output. The particular case of a symmetric ring resonator containing one or two focusing rods and a pair of curved mirrors was analyzed and a design technique is presented, allowing for easy, continuous shaping of the stability limits by changing only the distances in the resonator.

No abstract

For high resolution spectroscopy, a high power, stable line output laser is desirable for pumping different types of optical parametric oscillator resonators (OPO). Single-frequency lasers are in the range of 10 watts of output power, while, depending on the application and the OPO type, higher power (> 20 W) is desirable. In this work a single frequency high power laser based on diode pumping modules with Nd:YAG as the active medium was developed. Two Nd:YAG bars transversally pumped by diodes were used in a configuration of a CW polarized ring resonator with beam quality TEM 00 and output power of 105,2 W. The output power achieved is, to our knowledge, the highest for continuous polarized fundamental mode ring lasers using standard Nd:YAG modules with side pumping. The resonator allowed the tuning power in a large dynamic range and obtained excellent beam quality using a half-wave plate between the two rods for birefringence compensation. The single frequency operation was achieved using a TGG (Terbium Gallium Garnet) crystal, two magnets and an etalon, with an output power of 51.60 W and a 17 MHz full width at half maximum (FWHM) spectral width.