Surrogate measures like turbidity, which can be observed with high frequency in situ, have potential for generating high frequency estimates of total suspended solids (TSS) and total phosphorus (TP) concentrations. In the semiarid, snowmelt-driven, and irrigation-regulated Little Bear River watershed of northern Utah, high frequency in situ water quality measurements were recorded in conjunction with periodic chemistry sampling. Site-specific relationships were developed using turbidity as a surrogate for TP and TSS at two monitoring locations. Methods are presented for employing censored data and for investigating categorical explanatory variables (e.g., hydrologic conditions). Turbidity was a significant explanatory variable for TP and TSS at both sites, which differ in hydrologic and water quality characteristics. The relationship between turbidity and TP was stronger at the upper watershed site where TP is predominantly particulate. At both sites, the relationships between turbidity and TP varied between spring snowmelt and base flow conditions while the relationships between TSS and turbidity were consistent across hydrological conditions. This approach enables the calculation of high frequency time series of TP and TSS concentrations previously unavailable using traditional monitoring approaches. These methods have broad application for situations that require accurate characterization of fluxes of these constituents over a range of hydrologic conditions.

No abstract

No abstract

No abstract

The determination of sediment and nutrient loads is typically based on the collection and analysis of grab samples. The frequency and regularity of traditional sampling may not provide representation of constituent loading, particularly in systems with flashy hydrology. At two sites in the Little Bear River, Utah, continuous, high‐frequency turbidity was used with surrogate relationships to generate estimates of total phosphorus and total suspended solids concentrations, which were paired with discharge to estimate annual loads. The high frequency records were randomly subsampled to represent hourly, daily, weekly, and monthly sampling frequencies and to examine the effects of timing, and resulting annual load estimates were compared to the reference loads. Higher frequency sampling resulted in load estimates that better approximated the reference loads. The degree of bias was greater at the more hydrologically responsive site in the upper watershed, which required a higher sampling frequency than the lower watershed site to achieve the same level of accuracy in estimating the reference load. The hour of day and day of week of sampling impacted load estimation, depending on site and hydrologic conditions. The effects of sampling frequency on the determination of compliance with a water quality criterion were also examined. These techniques can be helpful in determining necessary sampling frequency to meet the objectives of a water quality monitoring program.