This paper presents a predictive Energy Management System (EMS), aimed to improve the performance of a domestic PV-battery system and maximize self-consumption by minimizing energy exchange with the utility grid. The proposed algorithm facilitates a self-consumption approach, which reduces electricity bills, transmission losses, and the required central generation/storage systems. The proposed EMS uses a combination of Fuzzy Logic (FL) and a rule based-algorithm to optimally control the PV-battery system while considering the day-ahead energy forecast including forecast error and the battery State of Health (SOH). The FL maximizes the lifetime of the battery by using SOH and State of Charge (SOC) in decision making algorithm to charge/discharge the battery. The proposed Battery Management System (BMS) has been tested using Active Office Building (AOB) located in Swansea University, UK. Furthermore, it is compared with three recently published methods and with the current BMS utilized in the AOB to show the effectiveness of the proposed technique. The results show that the proposed BMS achieves a saving of 18% in the total energy cost over six months compared to a similar day-ahead forecast-based work. It also achieves a saving up to 95% compared to other methods (with a similar structure) but without a day-ahead forecast-based management. The proposed BMS enhances the battery's lifetime by reducing the average SOC up to 47% compared to the previous methods through avoiding unnecessary charge and discharge cycles. The impact of the PV system size and the battery capacity on the net exchanged energy with the utility grid is also investigated in this study.INDEX TERMS Battery management system, energy management system, fuzzy logic, state of charge, state of health.

This paper proposes an Energy Management System (EMS) for domestic PV-battery applications with the aim of reducing the absolute net energy exchange with the utility grid by utilizing the two days-ahead energy forecasts in the optimization process. A Mixed-Integer Linear Programming (MILP) exploits two daysahead energy demand and PV generation forecasts to schedule the day-ahead battery energy exchange with both the utility grid and the PV generator. The proposed scheme is tested using the real data of the Active Office Building (AOB) located in Swansea University, UK. Performance comparisons with state-of-the-art and the commercial EMS currently running at the AOB reveal that the proposed EMS increases the self-consumption of PV energy and at the same time reduces the total energy cost. The absolute net energy exchange with the grid and the total operating costs are reduced by 121% and 54% compared to the state-of-the-art and 194% and 8% when compared to the commercial EMS over a six-month period. Furthermore, the results show that the proposed method can reduce the energy bill by up to 46% for the same period compared to the state-of-the-art. The paper also investigates the effect of using different objective functions on the performance of the EMS and shows that the proposed EMS operate more efficiently when it is compared with another cost function that directly promotes reducing the absolute net energy exchange.

A predictive real-time Energy Management System (EMS) is proposed which improves PV self-consumption and operating costs using a novel rule-based battery scheduling algorithm. The proposed EMS uses the day-ahead demand and PV generation forecasting to determine the best battery scheduling for the next day. The proposed method optimizes the use of the battery storage and extends battery lifetime by only storing the required energy by considering the forecasted dayahead energy at peak time. The proposed EMS has been implemented in MATLAB software and using Active Office Building on the Swansea University campus as a case study. Results are compared favorably with published state-of-the-arts algorithms to demonstrate its effectiveness. Results show a saving of 20% and 41% in total energy cost over six months compared to a forecast-based EMS and to a conventional EMS, respectively. Furthermore, a reduction of 54% in the net energy exchanged with the utility by avoiding the unnecessary charge/discharge cycles.