Abstract. Currently, the proper utilization of water treatment plants and optimizing their use is of particular importance. Coagulation and flocculation in water treatment are the common ways through which the use of coagulants leads to instability of particles and the formation of larger and heavier particles, resulting in improvement of sedimentation and filtration processes. Determination of the optimum dose of such a coagulant is of particular significance. A high dose, in addition to adding costs, can cause the sediment to remain in the filtrate, a dangerous condition according to the standards, while a sub-adequate dose of coagulants can result in the reducing the required quality and acceptable performance of the coagulation process. Although jar tests are used for testing coagulants, such experiments face many constraints with respect to evaluating the results produced by sudden changes in input water because of their significant costs, long time requirements, and complex relationships among the many factors (turbidity, temperature, pH, alkalinity, etc.) that can influence the efficiency of coagulant and test results. Modeling can be used to overcome these limitations; in this research study, an artificial neural network (ANN) multi-layer perceptron (MLP) with one hidden layer has been used for modeling the jar test to determine the dosage level of used coagulant in water treatment processes. The data contained in this research have been obtained from the drinking water treatment plant located in Ardabil province in Iran. To evaluate the performance of the model, the mean squared error (MSE) and correlation coefficient (R 2 ) parameters have been used. The obtained values are within an acceptable range that demonstrates the high accuracy of the models with respect to the estimation of water-quality characteristics and the optimal dosages of coagulants; so using these models will allow operators to not only reduce costs and time taken to perform experimental jar tests but also to predict a proper dosage for coagulant amounts and to project the quality of the output water under real conditions.
Abstract:Because the available water resources of the Arjan plain region in Iran do not fully meet the watering requirements for plants in farmlands, the crops suffer from water stress, a situation that causes them to wilt. The aim of this study is to develop a water resources planning model that helps decision-makers determine an appropriate cultivation pattern, optimize the exploitation from surface water resources, and specify the method of allocating water across different farm crops to minimize the detrimental effects of water shortage. Through investigating various models of water resources planning and properties along with the governing conditions for each of these models, the linear programming model was selected as a suitable option due to its simplicity and practical applicability to water resource allocation planning. The model was run for a five-year period by considering gradual variations through the determination of the most appropriate exploitation pattern from the available water resources (surface and groundwater). Results reveal that the negative water balance can be improved gradually as positive, where it will reach +20 million m 3 per year in 2040 from the current deficit of 236 million m 3 with an 8% increased net profit.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.