Sensor bias faults and sensor gain faults are two important types of faults in sensor. Simultaneous estimation of these sensor faults in nonlinear systems in the presence of input disturbance and measurement noise is challenging and has not been adequately addressed in literature. Hence, this article develops an observer-based sensor fault estimation method for generalized sector-bounded nonlinear systems in the presence of input disturbance and measurement noise. A generalized sector-bounded nonlinearity was chosen because it encompasses a wide range of nonlinearities including Lipschitz, positive real, and dissipative. This article presents necessary and sufficient conditions to achieve a suboptimal cost for a cost function consisting of the sum of the square integrals of the estimation errors to the square integrals of the disturbances in the form of linear matrix inequality. The linear matrix inequality can be solved offline to explicitly calculate observer gain, and the resulting observer simultaneously estimates the system states as well as both bias and gain faults in the sensors. Compared to previous literature, the proposed methodology is designed to work in the presence of both input disturbance and measurement noise. Additionally, this article considers a generalized sector-bounded nonlinearity which encompasses a variety of different physical nonlinearities. Furthermore, the observer does not require the online solution of the Riccati equation and is thus computationally less intensive compared with the methods of extended Kalman filtering. The observer design procedure is demonstrated through two illustrative examples consisting of a fourth-order double spring–mass system and a third-order wind turbine power transmission mechanism.

No abstract

No abstract

A robust power scheduling algorithm is proposed to schedule power flow between the main electricity grid and a microgird with solar energy generation and battery energy storage subject to uncertainty in solar energy production. To avoid over-conservatism in power scheduling while guaranteeing robustness against uncertainties, time-varying "soft" constraints on the State of Charge (SoC) of the battery are proposed. These soft constraints allow SoC limit violation at steps far from the current step but aim to minimize such violations in a controlled manner. The model predictive formulation of the problem over a receding time horizon ensures that the resulting solution eventually conforms to the hard SoC limits of the system at every step. The optimization problem for each step is formulated as a quadratic programming problem that is solved iteratively to find the soft constraints that are closest to the hard ones and still yield a feasible solution. Optimization results demonstrate the effectiveness of the approach.

A fractional derivative system identification approach for modeling battery dynamics is presented in this paper, where fractional derivatives are applied to approximate non-linear dynamic behavior of a battery system. The least squares-based state-variable filter (LSSVF) method commonly used in the identification of continuous-time models is extended to allow the estimation of fractional derivative coefficents and parameters of the battery models by monitoring a charge/discharge demand signal and a power storage/delivery signal. In particular, the model is combined by individual fractional differential models (FDMs), where the parameters can be estimated by a least-squares algorithm. Based on experimental data, it is illustrated how the fractional derivative model can be utilized to predict the dynamics of the energy storage and delivery of a lithium iron phosphate battery (LiFePO 4 ) in real-time. The results indicate that a FDM can accurately capture the dynamics of the energy storage and delivery of the battery over a large operating range of the battery. It is also shown that the fractional derivative model exhibits improvements on prediction performance compared to standard integer derivative model, which in beneficial for a battery management system. Keywords: fractional differential model (FDM); energy storage and delivery; system identification; battery management system (BMS); least squares-based state-variable filter (LSSVF) method