Lightly loaded structures underneath expansive soils encounter severe damage due to the swell/shrink nature of expansive soils resulting from moisture variations. Billions of dollars are spent every year to repair the damages caused by these soils in the United States and worldwide. Designing structures to accommodate the swelling strains is a major challenge as predicting the swelling potential of these soils accurately is not easy. A wide variety of swell prediction models have been introduced by various researchers to predict the behavior of these often-problematic expansive soils. These models include various properties of soils such as, plasticity characteristics, compaction conditions, consolidation characteristics, moisture content variations, matric suction and clay mineralogical characteristics. However, these models are generally developed with typical moderate to high plastic soils in mind whose plasticity indices range from 25 to 45. Their applicability to soils that have liquid limits in the order of 200% is not well understood. In this paper, the ability of these models to predict the behavior of excessively high plastic soils with plasticity indices ranging from 45 to 85 were evaluated. For this purpose, four existing analytical prediction models that use combinations of abovementioned properties were selected and used to predict the one-dimensional and threedimensional swelling strains on three high swelling soils. These predictions were verified by conducting one-dimensional and three-dimensional swell tests on the three soil types. The swell tests were conducted at three different initial moisture contents to observe how well the models could predict different levels of moisture absorption. The ability of each of the four selected methods in predicting both 1-D and 3-D swell strains was discussed and their relative merits and demerits are highlighted. In addition, finite element modeling was performed to simulate onedimensional and three-dimensional swell tests by using material models that use volumetric and suction changes with moisture contents to simulate expansive soil behavior within the finite element model. The results indicated that while the analytical prediction models gave reasonable results the finite element analysis predicted results were closest to the laboratory measure soils in case both 1-D and 3-D analyses. Among other analytical models the ones that incorporated mineralogical and suction data exhibited better results.

No abstract

No abstract

No abstract

No abstract