The effects of cavity quantum electrodynamics (QED), caused by the interaction of matter and the electromagnetic field in subwavelength resonant structures, have been the subject of intense research in recent years. The generation of coherent radiation by subwavelength resonant structures has attracted considerable interest, not only as a means of exploring the QED effects that emerge at small volume, but also for its potential in applications ranging from on-chip optical communication to ultrahigh-resolution and high-throughput imaging, sensing and spectroscopy. One such strand of research is aimed at developing the 'ultimate' nanolaser: a scalable, low-threshold, efficient source of radiation that operates at room temperature and occupies a small volume on a chip. Different resonators have been proposed for the realization of such a nanolaser--microdisk and photonic bandgap resonators, and, more recently, metallic, metallo-dielectric and plasmonic resonators. But progress towards realizing the ultimate nanolaser has been hindered by the lack of a systematic approach to scaling down the size of the laser cavity without significantly increasing the threshold power required for lasing. Here we describe a family of coaxial nanostructured cavities that potentially solve the resonator scalability challenge by means of their geometry and metal composition. Using these coaxial nanocavities, we demonstrate the smallest room-temperature, continuous-wave telecommunications-frequency laser to date. In addition, by further modifying the design of these coaxial nanocavities, we achieve thresholdless lasing with a broadband gain medium. In addition to enabling laser applications, these nanoscale resonators should provide a powerful platform for the development of other QED devices and metamaterials in which atom-field interactions generate new functionalities.

No abstract

The use of infrared lasers to power optical-scale lithographically fabricated particle accelerators is a developing area of research that has garnered increasing interest in recent years. We review the physics and technology of this approach, which we refer to as dielectric laser acceleration (DLA). In the DLA scheme operating at typical laser pulse lengths of 0.1 to 1 ps, the laser damage fluences for robust dielectric materials correspond to peak surface electric fields in the GV/m regime. The corresponding accelerating field enhancement represents a potential reduction in active length of the accelerator between 1 and 2 orders of magnitude. Power sources for DLA-based accelerators (lasers) are less costly than microwave sources (klystrons) for equivalent average power levels due to wider availability and private sector investment. Due to the high laser-to-particle coupling efficiency, required pulse energies are consistent with tabletop microJoule class lasers. Combined with the very high (MHz) repetition rates these lasers can provide, the DLA approach appears promising for a variety of applications, including future high energy physics colliders, compact light sources, and portable medical scanners and radiative therapy machines.

It is demonstrated that a Bragg waveguide consisting of a series of dielectric layers may form an excellent optical acceleration structure. Confinement of the accelerating fields is achieved, for both planar and cylindrical configurations by adjusting the first dielectric layer width. A typical structure made of silica and zirconia may support gradients of the order of 1 GV/m with an interaction impedance of a few hundreds of ohms and with an energy velocity of less than 0.5c. An interaction impedance of about 1000 Omega may be obtained by replacing the Zirconia with a (fictitious) material of epsilon=25. Special attention is paid to the wake field developing in such a structure. In the case of a relatively small number of layers, it is shown that the total electromagnetic power emitted is proportional to the square of the number of electrons in the macrobunch and inversely proportional to the number of microbunches; this power is also inversely proportional to the square of the internal radius of the structure for a cylindrical structure, and to the width of the vacuum core in a planar structure. Quantitative results are given for a higher number of dielectric layers, showing that in comparison to a structure bounded by metallic walls, the emitted power is significantly smaller due to propagation bands allowing electromagnetic energy to escape.

We introduce a low refractive index layer between the metal and the gain medium in metal-coated laser resonators and demonstrate that it can significantly reduce the dissipation losses. Analysis of a gain medium waveguide shows that for a given waveguide radius, the low index layer has an optimal thickness for which the lasing threshold gain is minimal. The waveguide analysis is used for the design of a novel three-dimensional cylindrical resonator that is smaller than the vacuum wavelength in all three dimensions and exhibits a low enough threshold gain to lase at room temperature.