No abstract

Microsized and shape-versatile flexible and wearable lithium-ion batteries (LIBs) are promising and smart energy storage devices for next-generation electronics. In the present work, we design and fabricate the first prototype of microsized fibrous LIBs (thickness ≈ 22 μm) based on multilayered coaxial structure of solid-state battery components over flexible and electrically conductive carbon fibers (CFs). The micro coaxial batteries over the CF surface were fabricated via electrophoretic deposition and dip-coating methods. The microfiber battery showed a stable potential window of 2.5 V with an areal discharge capacity of ∼4.2 μA h cm–2 at 13 μA cm–2 of the current density. The as-assembled battery fiber delivered a comparable energy density (∼0.006 W h cm–3) with solid-state lithium thin-film batteries at higher power densities (∼0.0312 W cm–3). The fibrous batteries were also connected in parallel and in series to deliver large current and high voltage, respectively. The fibrous battery also retains up to 85% discharge capacity even after 100 charge–discharge cycles. Furthermore, these battery fibers performed well under both static and bending conditions, which shows the robustness of the battery fiber. Therefore, this type of fibrous microbattery can be used in advanced flexible and wearable microelectronics, bioelectronics, robotics, and textile applications.

No abstract

No abstract

Development of printable and flexible energy storage devices is one of the most promising technologies for wearable electronics in textile industry. The present work involves the design of a printable and flexible all-solid-state rechargeable battery for wearable electronics in textile applications. Copper-coated carbon fiber is used to make a poly(ethylene oxide) (PEO)-based polymer nanocomposite for a flexible and conductive current collector layer. Lithium iron phosphate (LiFePO) and titanium dioxide (TiO) are utilized to prepare the cathode and anode layers, respectively, with PEO and carbon black composites. The PEO- and Li salt-based solid composite separator layer is utilized for the solid-state and safe electrolyte. Fabrication of all these layers and assembly of them through coating on fabrics are performed in the open atmosphere without using any complex processing, as PEO prevents the degradation of the materials in the open atmosphere. The performance of the battery is evaluated through charge-discharge and open-circuit voltage analyses. The battery shows an open-circuit voltage of ∼2.67 V and discharge time ∼2000 s. It shows similar performance at different repeated bending angles (0° to 180°) and continuous bending along with long cycle life. The application of the battery is also investigated for printable and wearable textile applications. Therefore, this printable, flexible, easily processable, and nontoxic battery with this performance has great potential to be used in portable and wearable textile electronics.