The removal of CO 2 impurities from C 2 H 2 -containing gas mixtures is an important step in purifying C 2 H 2 , a feedstock chemical used in the production of several commodity chemicals. However, that C 2 H 2 and CO 2 exhibit similar size and physicochemical properties makes their separation by physisorption extremely difficult. In this work, we detail how two hybrid ultramicroporous materials (HUMs)-known variant SIFSIX-3-Ni and variant TIFSIX-2-Cu-i-exhibit exceptional CO 2 /C 2 H 2 and C 2 H 2 /CO 2 selectivity, respectively. SIFSIX-3-Ni sets a benchmark for CO 2 /C 2 H 2 selectivity at low partial pressures, whereas TIFSIX-2-Cu-i ranks among the best porous materials in the context of C 2 H 2 / CO 2 selectivity. The performance of these HUMs was confirmed by real-time dynamic breakthrough experiments. To our knowledge, such yin-yang inversion of selectivity in closely related compounds is unprecedented. We attribute this to the distinct sorbate binding sites in SIFSIX-3-Ni and TIFSIX-2-Cu-i, as revealed by modeling studies.

Sequestration of CO2, either from gas mixtures or directly from air (direct air capture, DAC), could mitigate carbon emissions. Here five materials are investigated for their ability to adsorb CO2 directly from air and other gas mixtures. The sorbents studied are benchmark materials that encompass four types of porous material, one chemisorbent, TEPA-SBA-15 (amine-modified mesoporous silica) and four physisorbents: Zeolite 13X (inorganic); HKUST-1 and Mg-MOF-74/Mg-dobdc (metal-organic frameworks, MOFs); SIFSIX-3-Ni, (hybrid ultramicroporous material). Temperature-programmed desorption (TPD) experiments afforded information about the contents of each sorbent under equilibrium conditions and their ease of recycling. Accelerated stability tests addressed projected shelf-life of the five sorbents. The four physisorbents were found to be capable of carbon capture from CO2-rich gas mixtures, but competition and reaction with atmospheric moisture significantly reduced their DAC performance.

Purification of ethylene (C2H4), the largest-volume product of the chemical industry, currently involves energy-intensive processes such as chemisorption (CO2 removal), catalytic hydrogenation (C2H2 conversion), and cryogenic distillation (C2H6 separation). Although advanced physisorbent or membrane separation could lower the energy input, one-step removal of multiple impurities, especially trace impurities, has not been feasible. We introduce a synergistic sorbent separation method for the one-step production of polymer-grade C2H4 from ternary (C2H2/C2H6/C2H4) or quaternary (CO2/C2H2/C2H6/C2H4) gas mixtures with a series of physisorbents in a packed-bed geometry. We synthesized ultraselective microporous metal-organic materials that were readily regenerated, including one that was selective for C2H6 over CO2, C2H2, and C2H4.

Porous materials capable of selectively capturing CO 2 from flue-gases or natural gas are of interest in terms of rising atmospheric CO 2 levels and methane purification. Sizeexclusive sieving of CO 2 over CH 4 and N 2 has rarely been achieved. Herein we show that acrystal engineering approach to tuning of pore-size in ac oordination network, [Cu(quinoline-5-carboxyate) 2 ] n (Qc-5-Cu)ena+bles ultra-high selectivity for CO 2 over N 2 (S CN % 40 000) and CH 4 (S CM % 3300). Qc-5-Cu-sql-b,anarrowpore polymorph of the square lattice (sql) coordination network Qc-5-Cu-sql-a, adsorbs CO 2 while excluding both CH 4 and N 2 .E xperimental measurements and molecular modeling validate and explain the performance. Qc-5-Cu-sql-b is stable to moisture and its separation performance is unaffected by humidity.

The first sorbent with high CO2 selectivity and poor water affinity addresses need for trace CO2 remediation in confined spaces.