Incineration has become an attractive option for municipal solid waste (MSW) management, due to its several benefits. In fact, it allows volume and mass reduction of waste and energy recovery from MSW combustion. Nevertheless, MSW incineration (MSWI) produces three main types of residues: bottom ash (BA), fly ash (FA) and air pollution control (APC) residues, which require an adequate handling. BA is the most significant by-product from MSWI and is generally considered as nonhazardous waste. Instead, FAs are included as hazardous wastes because are characterised by high content of chlorides, heavy metals and organic compounds. The aim of this paper was to examine the characteristics of MSWI solid residues, the management and reuse of these wastes and their environmental assessment from a life cycle perspective. It was noted that the main components that make up the residues are lead and zinc as well as oxides, mainly CaO, SiO 2 and Al 2 O 3 . Furthermore, it is necessary to take into account the presence of PCDD/F which characterised FA and APC residues, mainly due to chlorine content. Chemical and physical properties of those residues make possible their reuse as construction material, as adsorbent, as well as in geotechnical and agricultural applications. Nevertheless, several studies have demonstrated that a drawback of the reuse of MSWI residues is the existence of heavy metals in elevated concentrations which may affect the environmental quality. In this regard, many studies were aimed to assess the environmental impact related to the introduction of MSWI residues as secondary material in several fields of application.

The content of metal(loid)s in particulate matter (PM) is of special concern due to their contribution to overall (PM) toxicity. In this study, the bioaccessibility and human health risk of potentially toxic metal(loid)s associated with PM were investigated in two areas of the Cantabrian region (northern Spain) with different levels of exposure: an industrial area mainly influenced by a ferromanganese alloy plant; and an urban area consisting mainly of residential and commercial activities, but also affected, albeit to a lesser extent by the ferroalloy plant. Total content and bioaccessible fractions in simulated lung fluids (SLFs) of Fe, Mn, Zn, Ni, Cu, Sb, Mo, Cd and Pb were determined by ICP-MS. Gamble's solution and artificial lysosomal fluid (ALF) were used to mimic different conditions inside the human respiratory system. A health risk assessment was performed based on the United States Environmental Protection Agency's (USEPA) methodology. Most metal(loid)s showed moderate and high bioaccessibility in Gamble's solution and ALF, respectively. Despite the high variability between the samples, metal(loid) bioaccessibility was found to be higher on average at the industrial site, suggesting a greater hazard to human health in the proximity of the main metal(loid) sources. Based on the results of the risk assessment, the non-carcinogenic risk associated with Mn exposure was above the safe limit (HQ> 1) under all the studied scenarios at the industrial site and under some specific scenarios at the urban location. The estimated carcinogenic inhalation risk for Cd exposure at the industrial site was found to be within the range between 1.0 × 10 to 1.0 × 10 (uncertainty range) under some scenarios. The results obtained in this study indicate that Mn and Cd inhalation exposure occurring in the vicinities of the studied areas may pose a human health risk.

Numerous studies have associated air manganese (Mn) exposure with negative health effects, primarily neurotoxic disorders. Despite there is not a specific European regulation, institutions such as the World Health Organization (WHO) have proposed an annual average guideline value of 150 ng/m. Bioaccessibility and toxicity mechanisms of Mn remain unclear, however it is generally agreed that adverse health effects are strongly linked to particle size and morphology, chemical composition and oxidation state. This study aims to deepen the understanding of the physico-chemical characteristics of PM and deposition samples collected in an urban area in the proximities of a ferromanganese alloy plant. Total Mn content was determined by ICP-MS after a microwave-assisted acid digestion. The size, morphology and chemical composition of individual particles were studied by SEM-EDX. XRD was used to identify the major crystalline phases. Most of the particles observed by SEM-EDX contain Mn. 60% of Mn-PM particles were spheres of small size and were attributed to condensation processes at the smelting unit. Mn-bearing particles present in deposition were characterized by irregular shapes and bigger sizes, most of them consisting of SiMn slags and Mn ores and alloys, and attributed to diffuse emissions from raw material and product handling and processing. Due to the differences in the characteristics of Mn-bearing particles found in the different matrices, further studies on the potential toxicity and health effects of these particles should be done, especially in relation with the small and spherical particles present in PM, which are expected to be more problematic.

The evaluation of the content of metals and metalloids in particulate matter (PM) and in atmospheric deposition in areas impacted by local industries is essential from an environmental and health risk perspective. In this study, the PM 10 levels and atmospheric deposition fluxes of potentially toxic metals and metalloids were quantified at three urban sites of the Cantabrian region (northern Spain), located at different distances downwind of a Mn alloy plant. The content of Mn, V, Fe, Ni, Cu, Zn, As, Mo, Cd, Sb and Pb in PM 10 and in the water-soluble and insoluble fractions of the deposition was determined by ICP-MS. Among the studied elements, the highest concentrations in PM 10 and deposition rates were found for Mn, Fe, Zn and Pb, associated with the Mn alloy industry, and for Cu, related to non-exhaust traffic emissions. The levels of Mn, Fe, Zn and Pb in PM 10 were higher in autumn, when the most frequent winds blow from the S-SW, whereas their highest deposition rates were found in winter and autumn, which are characterized by high monthly average precipitations. The water-soluble fraction of the atmospheric deposition of most metals increased with distance from the Mn alloy plant. The highest water-soluble fractions were found for Ni (72%), Zn (62%), Cu (60%) and Mn (49%). These results will be useful for the health risk assessment of the metal exposure associated with Mn alloy plants, as well as for the evaluation of the metal burden to soil, water and ecosystems related to this industrial activity.

Numerous studies have associated air manganese (Mn) exposure with negative health effects, primarily neurotoxic disorders. This work presents a description of the emission and dispersion of PM-bound Mn from industrial sources in the Santander bay area, Northern Spain. A detailed day-specific emission estimation was made and assessed for the main Mn source, a manganese alloy production plant under 8 different scenarios. Dispersion analysis of PM-bound Mn was performed using the CALPUFF model. The model was validated from an observation dataset including 101 daily samples from four sites located in the vicinities of the manganese alloy plant. Model results were in reasonable agreement with observations (r = 0.37; NMSE = 2.08; Fractional Bias = 0.44 and Modelled/Observed ratio = 1.57). Simulated and observed Mn concentrations in the study area were much higher than the guidelines proposed by the World Health Organization (WHO) and the U.S. Environmental Protection Agency (USEPA), highlighting the need to reduce the Mn concentrations in the area. Based on the analysis of the Mn source contribution from the ferromanganese alloy plant, some preventive and corrective measures are discussed at the end of the paper. This work shows that CALPUFF dispersion model can be used to predict PM-bound Mn concentrations with reasonable accuracy in the vicinities of industrial facilities allowing the exposure assessment of the nearby population, which can be used in future epidemiological studies.