Emission of odorous compounds from intensive livestock production is a cause of nuisance in populated rural areas. Knowledge on the chemical composition of odor and temporal variations in emissions are needed in order to identify factors of importance for emission rates and select proper abatement technologies. In this work, a method based on proton-transfer-reaction mass spectrometry (PTR-MS) has been developed and tested for continuous measurements of odorant emissions from intensive pig production facilities. The method is assessed to cover all presently known important odorants from this type of animal production with adequate sensitivity and a time resolution of less than one minute. The sensitivity toward hydrogen sulfide is demonstrated to exhibit a pronounced humidity dependency, which can be included in the calibration procedure in order to achieve quantitative results for this compound. Application of the method at an experimental pig facility demonstrated strong temporal variations in emissions, including diurnal variation. Based on these first results, air exchange and animal activity are suggested to be of importance for emission rates of odorants. Highest emissions are seen for hydrogen sulfide and acetic acid, whereas key odorants are evaluated from tabulated odor threshold values to be hydrogen sulfide, methanethiol, 4-methylphenol, and butanoic acid.

Rates of methane consumption were measured in subarctic coniferous and temperate mixed-hardwood forest soils, using static chambers and intact soil cores. Rates at both sites were generally between 1 and 3 mg of CH4 m-2 day-' and decreased with increasing soil water contents above 20%o. Addition of ammonium (1 ,umol g of soil-') strongly inhibited methane oxidation in the subarctic soils; a lesser inhibition was observed for temperate forest samples. The response to nitrogen additions occurred within a few hours and was probably due to physiological changes in the active methane-consuming populations. Methane consumption in soils from both sites was stratified vertically, with a pronounced subsurface maximum. This maximum was coincident with low levels of both nitrate and ammonium in the mixed-hardwood forest soil.

Abstract:The aim of the current paper is to discuss the sustainability aspect of biorefinery systems with focus on: biomass supply chains, processing of biomass feedstocks in biorefinery platforms and sustainability assessment methodologies. From the stand point of sustainability, it is important to optimize the agricultural production system and minimize the related environmental impacts at the farming system level. These impacts are primarily related to agri-chemical inputs and the related undesired environmental emissions and to the repercussions from biomass production. At the same time, the biorefineries needs a year-round supply of biomass and about 40-60% of the total operating cost of a typical biorefinery is related to the feedstocks chosen, and thus highlights on the careful prioritization of feedstocks mainly based on their economic and environmental loadings. Regarding the processing in biorefinery platforms, chemical composition of biomasses is important. Biomasses with higher concentrations of cellulose and hemicelluloses compared to lignin are preferred for bioethanol production in the lignocellulosic biorefinery, since the biodegradability of cellulose is higher than lignin. A green biorefinery platform enables the extraction of protein from grasses, producing an important alternative to importing protein sources for food products and animal feed, while also allowing processing of residues to deliver bioethanol. Currently, there are several approaches to integrate biorefinery platforms, which are aimed to enhance their economic and environmental sustainability. Regarding sustainability assessment, the complexities related to the material flows in a biorefinery and the delivery of alternative biobased products means dealing with multiple indicators in the decision-making process to enable comparisons of alternatives. Life Cycle Assessment is regarded as one of the most relevant tools to assess the environmental hotspots in the biomass supply chains, at processing stages and also to support in the prioritization of any specific biobased products and the alternatives delivered from biorefineries.Keywords: biorefinery, biomass feedstock, sustainability, biobased product, environmental performances, economic performances, Life Cycle Assessment 2 IntroductionThe societal need of energy and materials is predicted to reach a crisis point in the near future [1]. This is because of the coupling between escalating demand and cost of fossil fuels upon which the production of chemicals, materials and energy conversions still depend. The high energy intensity in material production has sustainability impacts on the energy sector, environment and economy [2]. Currently fossil fuels contribute about 80% of the global energy demand, and even if the current political commitments and strategies to tackle the issues of climate change and energy insecurity, as envisioned by different countries are in place, the global energy demand in 2035 is still projected to rise by 40% with fossil fuels contributing 75% [3]. The ...

Methane oxidation in soil cores from a mixed hardwood-coniferous forest varied relatively little as a function of incubation temperatures from-1 to 30°C. The increase in oxidation rate was proportional to T2-4 (in kelvins). This relationship was consistent with limitation of methane transport through a soil gas phase to a subsurface zone of consumption by diffusion. The Qlo for CO2 production, 3.4, was substantially higher than that for methane oxidation, 1.1, and indicated that the response of soil respiration to temperature was limited by enzymatic processes and not diffusion of either organic substrates or molecular oxygen. When grown under conditions of phase-transfer limitation, cultures of Methylomonas rubra showed a minimal response to temperature changes between 19 and 38°C, as indicated by methane oxidation rates; in the absence of