Power transformers are crucial in an electric power system. Failures in transformers can affect the quality and cause interruptions in the power supply. Partial discharges are a phenomenon that can cause failures in the transformers if not properly monitored. Typically, the monitoring requires high-cost corrective maintenance or even interruptions of the power system. Therefore, the development of online non-invasive monitoring systems to detect partial discharges in power transformers has great relevance since it can reduce significant maintenance costs. Although commercial acoustic emission sensors have been used to monitor partial discharges in power transformers, they still represent a significant cost. In order to overcome this drawback, this paper presents a study of the feasibility of low-cost piezoelectric sensors to identify partial discharges in mineral insulating oil of power transformers. The analysis of the feasibility of the proposed low-cost sensor is performed by its comparison with a commercial acoustic emission sensor commonly used to detect partial discharges. The comparison between the responses in the time and frequency domain of both sensors was carried out and the experimental results indicate that the proposed piezoelectric sensors have great potential in the detection of acoustic waves generated by partial discharges in insulation oil, contributing for the popularization of this noninvasive technique.

This paper presents a performance assessment of macro fiber composite (MFC) sensors for measuring acoustic emission (AE) signals from partial discharges (PD) in power transformers filled with mineral oil. MFC sensors are low-profile and flexible, allowing them to be attached to uneven surfaces, such as a transformer wall. Two types of MFC sensors were assessed: P1 (d33 effect) and P2 (d31 effect), which are optimized for different deformations in the structure, such as elongation and contraction, respectively. In addition, a conventional AE sensor, R15I-AST model from Physical Acoustics South America, was also used as a reference for comparative analysis. Four metrics were applied to the signals: root mean square, energy criterion, Akaike criterion, power spectral density, and correlation. The experimental results indicate a high similarity between the MFC sensors and the conventional AE sensor, which expands the research field in acoustic PD measurement in power transformers by using low-cost and flexible sensors.

No abstract

No abstract

Three-phase induction motors (IMs) are electrical machines used on a large scale in industrial applications because they are versatile, robust and low maintenance devices. However, IMs are significantly affected when fed by unbalanced voltages. Prolonged operation under voltage unbalance (VU) conditions degrades performance and shortens machine life by producing imbalances in stator currents that abnormally raise winding temperature. With the development of new technologies and research on non-destructive techniques (NDT) for fault diagnoses in IMs, it is relevant to obtain economically accessible, efficient and reliable sensors capable of acquiring signals that allow the identification of this type of failure. The objective of this study is to evaluate the application of low-cost piezoelectric sensors in the acquisition of acoustic emission (AE) signals and the identification of VU through the analysis of short-term Fourier transform (STFT) spectrograms. The piezoelectric sensor makes NDT feasible, as it is an affordable and inexpensive component. In addition, STFT allows time-frequency analyses of acoustic emission signals. In this NDT, two sensors were coupled on both sides of an induction motor frame. The AE signals obtained during the IM operation were processed and the resulting spectrograms were analyzed to identify the different VU levels. After comparing the AE signals for faulty conditions with the signals for the IM operating at balanced voltages, it was possible to obtain a desired identification that confirmed the successful application of low-cost piezoelectric sensors for VU condition detection in three-phase induction machines.