Cold Spray Additive Manufacturing (CSAM) produces freeform parts by accelerating powder particles at supersonic speed which, impacting against a substrate material, trigger a process to consolidate the CSAM part by bonding mechanisms. The literature has presented scholars’ efforts to improve CSAM materials’ quality, properties, and possibilities of use. This work is a review of the CSAM advances in the last decade, considering new materials, process parameters optimization, post-treatments, and hybrid processing. The literature considered includes articles, books, standards, and patents, which were selected by their relevance to the CSAM theme. In addition, this work contributes to compiling important information from the literature and presents how CSAM has advanced quickly in diverse sectors and applications. Another approach presented is the academic contributions by a bibliometric review, showing the most relevant contributors, authors, institutions, and countries during the last decade for CSAM research. Finally, this work presents a trend for the future of CSAM, its challenges, and barriers to be overcome.

One of the main problems that slows down the implementation of the green hydrogen (H2) economy is the cost of water electrolysis. While part of this cost is associated to the price of electricity, a significant part relies on the parts of the electrolyzers. Despite their advantages, Proton Exchange Membrane Water Electrolyzers (PEMWE) still have to overcome some drawbacks to reduce its H2 production cost, while maintaining high efficiencies. For decades, thermal spraying has been used for the production of coatings all over the world because of its versatility in industry for machinery and tools preservation, surfaces protection and corrosion prevention. This study demonstrates the possibilities of Cold Gas Spray (CGS) for the cost-reductive production of a component of PEMWEs, the Bipolar Plates (BPPs), by metal 3D printing. In this process, the incorporation of a mask between the nozzle exit and the substrate can drastically transform the BPP production to a very fast and automatic bottom-up process where material is deposited layer by- layer for building up the three-dimensional flow field patterns from a flat surface. Microstructure and topography of 3D printed BPPs were inspected by microscopy techniques. For evaluating the fulfilment of BPPs requirements (interfacial contact resistance and corrosion resistance) the new BPPs were characterized following the Davies’ method and with potentiodynamic test in O2-saturated H2SO4 solutions, respectively.

Cold Spray Additive Manufacturing (CSAM) is a thermal spray technique that is typically used for the repair of metallic components. One of the challenges of CSAM is to improve the geometrical accuracy of the sprayed parts, along with overcoming the inferiority of the mechanical properties of the deposits by tailoring their microstructure with different deposition strategies. For this, Cu, Al, Ti, and Ti6Al4V substrates were reconstructed by two Cold Spray (CS) methods: Traditional (T) and a novel strategy, Metal Knitting (MK). The final geometry, microstructure, and mechanical properties of the reconstructed parts by these two methods were compared. Additionally, we investigated the effects of annealing on the microstructure of sprayed components and its influence on adhesion, resistance to erosion, and abrasive wear. The results indicate that annealing effectively reduces the microstructure defects of the remanufactured parts (up to 30% porosity reduction) and improves the adhesive strength (i.e., below 30 MPa for as-sprayed deposits, and up to 160 MPa for heat-treated Ti4Al4V deposits). Notably, the abrasive and erosive resistance of the Cu and Al annealed deposits sprayed by MK gave very similar results compared to their bulk counterparts, suggesting that it is an efficient method for the reconstruction of damaged parts.