Operando powder X-ray diffraction (PXRD) is a widely employed method for the investigation of structural evolution and phase transitions in electrodes for rechargeable batteries. Due to the advantages of high brilliance and high X-ray energies, the experiments are often carried out at synchrotron facilities. It is known that the X-ray exposure can cause beam damage in the battery cell, resulting in hindrance of the electrochemical reaction. This study investigates the extent of X-ray beam damage during operando PXRD synchrotron experiments on battery materials with varying X-ray energies, amount of X-ray exposure and battery cell chemistries. Battery cells were exposed to 15, 25 or 35 keV X-rays (with varying dose) during charge or discharge in a battery test cell specially designed for operando experiments. The observed beam damage was probed by µPXRD mapping of the electrodes recovered from the operando battery cell after charge/discharge. The investigation reveals that the beam damage depends strongly on both the X-ray energy and the amount of exposure, and that it also depends strongly on the cell chemistry, i.e. the chemical composition of the electrode.

Operando powder X-ray diffraction (PXRD) is a widely employed method for investigation of structural evolution and phase transitions in electrodes for rechargeable batteries. Due to the advantages of high brilliance and high X-ray energies, the experiments are often carried out at synchrotron facilities. It is known that the X-ray exposure can cause beam damage in the battery cell resulting in hindrance of the electrochemical reaction. In this study, we investigate the extent of X-ray beam damage during operando powder X-ray diffraction synchrotron experiments of battery materials with varying X-ray energies, amount of X-ray exposure and battery cell chemistries. Battery cells were exposed to 15, 25, or 35 keV X-rays (with varying dose) during charge or discharge in a battery tests cell specially designed for operando experiments. The observed beam damage was probed by µPXRD mapping of the electrodes recovered from the operando battery cell after charge/discharge. Our investigation reveals that beam damage depends strongly both on X-ray energy, amount of exposure and that it depends strongly on the cell chemistry, i.e. the chemical composition of the electrode.

Lithium vanadium fluorophosphate, LiVPO 4 F, is a promising cathode material for Li-ion batteries due to its high intercalation potential (4.24 V vs Li/Li + ) and high stability. However, recent studies show that as-synthesized LiVPO 4 F very often contains oxygen-defects on the fluoride site giving rise to a general composition of LiVPO 4 F 1-y O y with vanadium in a mixed +III/+IV valence state. The inclusion of oxygen naturally influences the electrochemical properties greatly, and a thorough material characterization is necessary to understand the performance. In this study, we synthesize lithium vanadium fluorophosphate by two common strategies: solid-state and hydrothermal synthesis.We show that solid-state synthesis provides LiVPO 4 F, while the hydrothermal method, in contrast to previous reports, leads to inclusion of ca. 35 % oxygen on the fluoride site and significant disorder in the material. The different electrochemical properties were probed by operando synchrotron X-ray powder diffraction to investigate the effects of oxygen inclusion on the structural evolution during electrochemical lithiation and delithiation. This reveals that while LiVPO 4 F exhibits a typical biphasic phase evolution, the sample with oxygen inclusion on the fluoride site displays extended solid-solution behavior. This explains previous observations of improved capacity retention due to defects.

No abstract

In operando powder diffraction remains one of the most powerful tools for non‐destructive investigation of battery electrode materials. While in operando X‐ray, especially synchrotron radiation, powder diffraction is by now a routine experimental technique, in operando neutron powder diffraction is still less established. We present a new electrochemical cell for in operando neutron powder diffraction, which is, first and foremost, easy to use, but can also cycle electrode materials under electrochemical conditions close to those achieved using standard laboratory cells. The cell has been designed in multiple sizes, and high‐quality electrochemical and neutron powder diffraction data is presented for sample sizes as low as 48 mg total active material. The cell handles lithium‐ion and sodium‐ion materials equally well, with no difference in how the cell is prepared and assembled. The cell is intended to be used as sample environment at powder diffractometers at the neutron facilities MLZ, ORNL and ACNS.