We present a low-noise distributed acoustic sensor using enhanced backscattering fiber with a series of localized reflectors. The point reflectors were inscribed in a standard telecom fiber in a fully automated system by focusing an ultra-fast laser through the fiber cladding. The inscribed reflectors provided a reflectance of −53 dB, significantly higher than the Rayleigh backscattering level of −70 dB/m, despite adding only 0.01 dB of loss per 100 reflection points. We constructed a coherent φ-OTDR system using a double-pulse architecture to probe the enhanced backscattering fiber. Using this system, we found that the point reflectors enabled an average phase noise of −91 dB (re rad2/Hz), 20 dB lower than sensors formed using Rayleigh backscattering in the same fiber. The sensors are immune to interference fading, exhibit a high degree of linearity, and demonstrate excellent non-local signal suppression (>50 dB). This work illustrates the potential for low-cost enhanced backscattering fiber to enable low-noise, long-range distributed acoustic sensing.

Four 3rd order fiber Bragg gratings were inscribed into separate cores of a 7 core multi-core fiber using the point-by-point inscription technique. A 1030 nm, 206 ± 5 fs laser was used, operating at a frequency of 1 kHz and pulse energy of 2.1 ± 0.2 µJ. Independent Bragg resonances at λ = 1541.01 ± 0.02, 1547.82 ± 0.02, 1532.66 ± 0.02, and 1537.42 ± 0.02 nm and extinction ratios of 13.97 ± 0.4, 16.02 ± 0.4, 10.08 ± 0.4 and 13.40 ± 0.4 dB were recorded. Our data analysis shows that refractive index changes, Δn, of the order 10 were induced. Core-specific inscription of fiber Bragg gratings in a multi-core fiber can provide a flexible and versatile platform to address the needs of recent space division multiplexed transmission and optical sensor networks.

No abstract

No abstract

No abstract