(1) This study aims to define a simple and effective method to calculate skidding distances on steep karst terrain, rich in ground obstacles (stoniness and rockiness) to support decision planning of secondary and primary forest infrastructure network for timber extraction in productive selective cut forests. Variations between geometrical extraction distances and actual distances were highlighted on the operational planning level (i.e., compartment level) through GIS-related calculation models, focusing on cable skidder timber extraction. Automation in defining geometrical and real extraction distances, as well as relative forest openness were achieved by geo-processing workflows in GIS environment. Due to variation of extraction correction factors at the compartment level from a minimum of 1.19 to a maximum of 5.05 in the same management unit, it can be concluded that planning harvesting operations (timber extraction) at operational level should not include the use of correction factors previously obtained for entire terrain (topographical) categories, sub-categories or even management units.

This research was conducted to determine the cause, intensity and location of damage (stem, butt end, root collar, root) and the extent of damage to standing trees during felling and processing by an harvester and timber extraction by a forwarder (cut-to-length system). The research was conducted in the central part of the Republic of Croatia in the Management Unit (MU) “Bjelovarska Bilogora” during the thinning of Subcompartment 14b, area of 18.28 ha, in the stand of hornbeam (Carpino betuli—Quercetum roboris fagetosum Rauš 1975), age 70, and of Subcompartment 14c, area of 9.07 ha, in a stand of common beech (Carici pilosae—Fagetum Oberdorfer 1957) aged 79 years. The thinning intensity was 12.13% in Subcompartment 14b and 13.72% in Subcompartment 14c. Field measurements were carried out on sample plots—the first time in 2017 to determine the intensity and characteristics of the damage to standing trees with regard to the cause of the damage (harvester or forwarder), and the second time in 2018 to determine the overall intensity and features of the damage to standing trees after finishing harvesting operations. For all trees remaining in the stand after the harvesting operations, the following were determined: tree species, diameter at breast height (DBH), the position of the tree in the stand depending on the forest traffic infrastructure, and—if damaged—cause of damage, type of damage, the position of damage on the tree, and dimensions of damage. The intensity of the damage was expressed by the ratio of damaged and undamaged trees, with a detailed analysis of bark damage (squeezed-bark damage and peeled-bark injuries). The results of the research indicate the highest prevalence of peeled-bark injuries. In relation to the total number of standing trees, trees with peeled-bark injuries were more represented in Subcompartment 14c (39%) than in Subcompartment 14b (33%). In Subcompartment 14b, the harvester and the forwarder damaged an equal number of trees, while in Subcompartment 14c, the harvester damaged 59% of the damaged trees. In both subcompartments, an average of 83% of (peeled bark) injuries were up to 1.3 m above the ground. In both subcompartments, the most common (67%) were injuries up to 100 cm2 in size, for which many authors claim the tree can heal by itself. Given the increasing use of harvester-forwarder systems in deciduous stands and research results that indicate possible damage to standing trees, it is necessary to pay attention to all phases of planning and execution of timber harvesting operations, thus minimising negative effects.

background and Purpose: Fuel consumption in timber harvesting operations is significant for both economic and environmental reasons. In economic sense, one significant part of timber harvesting costs is reduced to fuel costs, and in environmental sense 80% to 95% of exhaust emissions and soot particles in forest machinery are in fact associated with fuel consumption. Materials and Methods: The research object was a 6-wheel Valmet 840.2 forwarder and research was conducted in Forest Administration Vinkovci (lowland part of Croatia) during seeding felling in a stand of pedunculate oak and narrow-leafed ash. For the purpose of measuring fuel consumption on the researched forwarder a differential flow device was installed together with FMS (Fleet Management System) which was used for data transfer. results: Fuel consumption is expressed in six different ways concerning: cycle, extraction distance of 100 m, time (hour), load mass (tons), gross load volume (m 3) and product of mass and transporting distance (tkm). Fuel consumption amounted to 0.56 l•tkm-1 during the extracting of logs and 0.78 l•tkm-1 during the extraction of energy wood. The results also show an increasing trend of fuel consumption expressed per ton of transported load with the increase of travelled distance during the extraction. Conclusions: Fuel consumption expressed in l•tkm-1 is the most accurate fuel consumption indicator because it allows a realistic comparison of different types of machines with different loads (t, m 3) at different extracting distances. The higher fuel consumption of an unloaded forwarder compared to a loaded forwarder can be explained with an increased wheel slip of an unloaded forwarder due to reduced traction between wheels and the soil both in the extraction of logs and energy wood.

The forestry and timber industry are strong sectors in the economies of European countries. The current trend of introducing forestry management that respects the various functions of the forest has created new challenges. However, forestry itself, as well as those challenges, varies in different regions in Europe. The aim of this review paper was to describe forest resources and their potential as well to define challenges in forestry and forest engineering in regions of East Europe. Case studies were selected from four countries: Croatia, Latvia, Poland and Romania. The background data and information of the forest-based sector included: forest resources and forest productivity, forest utilisation, development of forest operations and difficulties in forest management. In the analysed countries, state-owned forestry was represented by at least 45%. Forestry is an important sector in all four countries and future challenges are observed in forest management and forest engineering mainly including: an increase in timber resources, improvement in species composition for better productivity and the introduction of effective mechanised forest operations in pre-commercial thinning. Further improvement of harvester heads is expected for the harvesting of broadleaved species and for young stands. Issues linked to the environment were also recognised as challenging factors: mild winters make it difficult to use CTL technology on wet and sensitive sites. Additionally, dry seasons have a high impact on forest fire frequency, but this can be controlled by effective monitoring systems. Improvement in IT systems used in forest operations should limit the carbon footprint by optimising transport, machine use and limiting fuel use. Finally, innovations are recognised as key issues in the improvement of forest management and forest engineering; therefore, special budgets have been allocated to support science and development.

The use of forestry vehicles in mechanised harvesting systems is still the most effective way of timber procurement, and forestry vehicles need to have high mobility to face various terrain conditions. This research gives boundaries of planning timber extraction on sloped terrain with a cable skidder, considering terrain parameters (slope, direction of skidding, cone index), vehicle technical characteristics and load size (5 different loads) relying on sustainability and eco-efficiency. Skidder mobility model was based on connecting two systems: vehicle-terrain (load distribution) and wheel-soil (skidder traction performance) with two mobility parameters: (1) maximal slope during uphill timber extraction by a cable skidder based on its traction performance (gradeability), and (2) maximal slope during downhill timber extraction by a cable skidder when thrust force is equal to zero. Results showed mobility ranges of an empty skidder for slopes between −50% and +80%, skidder with 1 tonne load between −26% and +63%, skidder with 2 tonne load between −30% and +51%, skidder with 3 tonne load between −34% and +39%, skidder with 4 tonne load between −35% and +30% and skidder with 5 tonne load between −41% and +11%.These results serve to improve our understanding of safer, more efficient timber extraction methods on sloped terrain.