Bioanalysis of polar analytes using liquid chromatography–tandem mass spectrometry (LC-MS/MS) remains a significant challenge because of their poor chromatographic retention on the commonly used reversed-phase LC columns and the resulting severe ionization suppression from coeluting matrix components. Here we present a novel approach to perform ultrahigh-throughput and chromatography-free bioanalysis of polar compounds using a prototype acoustic ejection mass spectrometer (AEMS) platform. Previously developed for direct analysis of solid or liquid samples by MS, the open port interface (OPI) has recently been modified and coupled to an acoustic nanoliter dispenser to enable high-speed direct MS analysis from 384-well plates with a reported speed as fast as 0.5 s/sample. Ionization suppression was reduced due to the >1000 fold dilution of the original sample by the carrier solvent in the AE-OPI-MS operation. Taking full advantage of the chromatography-free and suppression-reducing features of this prototype instrument, we successfully demonstrated the ultrahigh-throughput bioanalysis of metformin, a small polar substrate commonly used in high-throughput in vitro transporter inhibition assays in the early ADME profiling space in drug discovery. The AEMS platform achieved a speed of 2.2 s/sample using only 10 nL of sample volume. Similar bioanalytical and biological results from actual assay samples were obtained by AEMS when compared to those obtained by the fastest LC-MS/MS method previously reported, along with a 15-fold speed advantage and ∼500-fold less sample consumption to enable future assay miniaturization. The general applicability of this novel approach to bioanalysis of several classes of polar analytes including ethambutol, isoniazid, ephedrine, and gemcitabine in biological matrices was further demonstrated.

The move toward label-free screening in drug discovery has increased the demand for mass spectrometry (MS)-based analysis. Here we investigated the approach of coupling acoustic sample deposition (ASD) with laser diode thermal desorption (LDTD)-tandem mass spectrometry (MS/MS). We assessed its use in a cytochrome P450 (CYP) inhibition assay, where a decrease in metabolite formation signifies CYP inhibition. Metabolite levels for 3 CYP isoforms were measured as CYP3A4-1′-OH-midazolam, CYP2D6-dextrorphan, and CYP2C9-4′-OH-diclofenac. After incubation, samples (100 nL) were acoustically deposited onto a stainless steel 384-LazWell plate, then desorbed by an infrared laser directly from the plate surface into the gas phase, ionized by atmospheric pressure chemical ionization (APCI), and analyzed by MS/MS. Using this method, we achieved a sample analysis speed of 2.14 s/well, with bioanalytical performance comparable to the current online solid-phase extraction (SPE)-based MS method. An even faster readout speed was achieved when postreaction sample multiplexing was applied, where three reaction samples, one for each CYP, were transferred into the same well of the LazWell plate. In summary, LDTD coupled with acoustic sample deposition and multiplexing significantly decreased analysis time to 0.7 s/sample, making this MS-based approach feasible to support high-throughput screening (HTS) assays.

The evaluation of interactions between drug candidates and transporters such as P-glycoprotein (P-gp) has gained considerable interest in drug discovery and development. Inhibition of P-gp can be assessed by performing bi-directional permeability studies with in vitro P-gp-expressing cellular model systems such as Caco-2 (human colon carcinoma) cells, using digoxin as a substrate probe. Existing methodologies include either assaying (3)H-digoxin with liquid scintillation counting (LSC) detection or assaying non-labeled digoxin with liquid chromatography-tandem mass spectrometric (LC-MS/MS) analysis at a speed of several minutes per sample. However, it is not feasible to achieve a throughput high enough using these approaches to sustain an early liability screen that generates more than a thousand samples on a daily basis. To address this challenge, we developed an ultrafast (9 s per sample) bioanalytical method for digoxin analysis using RapidFire™, an on-line solid-phase extraction (SPE) system, with MS/MS detection. A stable isotope labeled analog, d3-digoxin, was used as internal standard to minimize potential ionization matrix effect during the RF-MS/MS analysis. The RF-MS/MS method was more than 16 times faster than the LC-MS/MS method but demonstrated similar sensitivity, selectivity, reproducibility, linearity and robustness. P-gp inhibition results of multiple validation compounds obtained with this RF-MS/MS method were in agreement with those generated by both the LC-MS/MS method and the (3)H-radiolabel assay. This method has been successfully deployed to assess P-gp inhibition potential as an important early liability screen for drug-transporter interaction.

A very fast and robust analytical method was successfully developed for the measurement of the clinically relevant OATP1B1 substrate, pitavastatin. The successful development and implementation of this very important early liability screen has helped to facilitate judicious lead candidate progression and will ultimately help build a greater understanding of OATP1B1-NME interactions, in general. Copyright © 2016 John Wiley & Sons, Ltd.