Increasing evidence suggests that mechanical cues inherent to the extracellular matrix (ECM) may be equally as critical as its chemical identity in regulating cell behavior. We hypothesized that the mechanical properties of the ECM directly regulate the motility of vascular smooth muscle cells (SMCs) and tested this hypothesis using polyacrylamide substrates with tunable mechanical properties. Quantification of the migration speed on uniformly compliant hydrogels spanning a range of stiffnesses (Young's moduli values from 1.0 to 308 kPa for acrylamide/bisacrylamide ratios between 5/0.1% and 15/1.2%, respectively) revealed a biphasic dependence on substrate compliance, suggesting the existence of an optimal substrate stiffness capable of supporting maximal migration. The value of this optimal stiffness shifted depending on the concentration of ECM protein covalently attached to the substrate. Specifically, on substrates presenting a theoretical density of 0.8 microg/cm(2) fibronectin, the maximum speed of 0.74 +/- 0.09 microm/min was achieved on a 51.9 kPa gel; on substrates presenting a theoretical density of 8.0 microg/cm(2) fibronectin, the maximum speed of 0.72 +/- 0.06 microm/min occurred on a softer 21.6 kPa gel. Pre-treatment of cells with Y27632, an inhibitor of the Rho/Rho-kinase (ROCK) pathway, reduced these observed maxima to values comparable to those on non-optimal stiffnesses. In parallel, quantification of TritonX-insoluble vinculin via Western blotting, coupled with qualitative fluorescent microscopy, revealed that the formation of focal adhesions and actin stress fibers also depends on ECM stiffness. Combined, these data suggest that the mechanical properties of the underlying ECM regulate Rho-mediated contractility in SMCs by disrupting a presumptive cell-ECM force balance, which in turn regulates cytoskeletal assembly and ultimately, cell migration.

Multiphoton microscopy of collagen hydrogels produces second harmonic generation (SHG) and two-photon fluorescence (TPF) images, which can be used to noninvasively study gel microstructure at depth ( approximately 1 mm). The microstructure is also a primary determinate of the mechanical properties of the gel; thus, we hypothesized that bulk optical properties (i.e., SHG and TPF) could be used to predict bulk mechanical properties of collagen hydrogels. We utilized polymerization temperature (4-37 degrees C) and glutaraldehyde to manipulate collagen hydrogel fiber diameter, space-filling properties, and cross-link density. Multiphoton microscopy and scanning electron microscopy reveal that as polymerization temperature decreases (37-4 degrees C) fiber diameter and pore size increase, whereas hydrogel storage modulus (G', from 23 +/- 3 Pa to 0.28 +/- 0.16 Pa, respectively, mean +/- SE) and mean SHG decrease (minimal change in TPF). In contrast, glutaraldehyde significantly increases the mean TPF signal (without impacting the SHG signal) and the storage modulus (16 +/- 3.5 Pa before to 138 +/- 40 Pa after cross-linking, mean +/- SD). We conclude that SHG and TPF can characterize differential microscopic features of the collagen hydrogel that are strongly correlated with bulk mechanical properties. Thus, optical imaging may be a useful noninvasive tool to assess tissue mechanics.

No abstract