No abstract

The effect of electrolyte (NaHCO3) concentration on the adsorption of poly-DADMAC (poly-diallyldimethylammonium chloride) onto cellulosic fibers with different charge profiles was investigated. Surface carboxymethylated fibers were obtained by grafting carboxymethyl cellulose (CMC) onto the fiber surface and bulk carboxymethylated fibers were obtained by reacting the fibers with monochloroacetic acid. It was shown that nonionic interactions do not exist between cellulose and poly-DADMAC, rather electrostatic interactions govern the adsorption. Charge stoichiometry prevails under electrolyte-free conditions, whereas surface charge overcompensation occurs at higher electrolyte concentrations. It was shown that charge stoichiometry prevails if the thickness of the electric double layer kappa(-1) was larger than the mean distance between the charges on the fiber surface, as predicted by polyelectrolyte adsorption theories, taking lateral correlation effects into account. In a second set of experiments the ESCA technique served to independently calibrate the polyelectrolyte titrations for determining the surface charge of cellulosic fibers. Various molecular masses of poly-DADMAC were adsorbed to carboxymethylated fibers having different charge profiles. The adsorption of low M(w) poly-DADMAC (7.0 x 10(3)), analyzed by polyelectrolyte titration, was about 10 times higher than that of the high M(w) poly-DADMAC (9.2 x 10(5)). Despite the difference in accessibility of these two polyelectrolytes to the fiber cell wall, ESCA surface analysis showed, as expected, only slight differences between the two polyelectrolytes. This gives strong credibility to the idea that surface charge content of cellulosic fibers can be analyzed by means of adsorption of a high-molecular-mass cationic polymer, i.e., by polyelectrolyte titration.

The penetration of cationic polyelectrolytes into anionic cellulosic fibers was evaluated with fluorescent imaging techniques in order to clarify the mechanism and time scales for the diffusion process. The bulk charge of the cellulosic fibers indirectly creates a driving force for diffusion into the porous fiber wall, which is entropic in nature due to a release of counterions as the polyelectrolyte adsorbs. The individual bulk charges in the fiber cell wall also interact with the diffusing polyelectrolyte, such that the polyelectrolyte diffuses to the first available charge and consequently adsorbs and remains fixed. Thus, subsequent polyelectrolyte chains must first diffuse through the adsorbed polyelectrolyte layer before adsorbing to the next available bulk charges. This behavior differs from earlier suggested diffusion mechanisms, by which polyelectrolytes were assumed to first adsorb to the outermost surface and then reptate into the pore structure. The time scales for polyelectrolyte diffusion were highly dependent on the flexibility of the chain, which was estimated from calculations of the persistence length. The persistence length ultimately depended on the charge density and electrolyte concentration. The charge density of the polyelectrolyte had a greater influence on the time scales for diffusion. High charge density polyelectrolytes were observed to diffuse on a time scale of months, whereas the diffusion of low charge density polyelectrolytes was measured on the order of hours. An influence of the chain length, that is, steric interactions due the persistence length of the polyelectrolyte and to the tortuosity of the porous structure of the fiber wall, could only be noted for low charge density polyelectrolytes. Increasing the electrolyte concentration increased the chain flexibility by screening the electrostatic contribution to the persistence length, in turn inducing a faster diffusion process. However, a significant change in the diffusion behavior was observed at high electrolyte concentrations, at which the interaction between the polyelectrolyte charges and the fiber charges was almost completely screened.

No abstract

The adsorption behavior of a low charge density cationic polyelectrolyte to cellulosic fibers has been studied. Cationic dextran served as a model polyelectrolyte, as it can be prepared over a range in molecular mass and charge density. The adsorption behavior of the cationic dextran was measured in electrolyte-free conditions using polyelectrolyte titration techniques. By fluorescent labeling the cationic dextran, the extent to which adsorption occurs inside the porous structure was further determined by fluorescent confocal laser scanning microscopy. Cationic dextran having a sufficiently low charge density adsorbed into the pores, although the extent the cationic dextran adsorbed was governed by the molecular mass. The adsorption behavior of the cationic dextran was also studied in various electrolyte concentrations. The adsorbed mass monotonically decreased with increasing electrolyte, as the electrostatic interaction with the substrate was more effectively screened. This behavior also suggests that the interactions between adsorbed polyelectrolyte chains, i.e. lateral correlation effects, are negligible for low charge density polyelectrolytes. Finally, the effect of having a preadsorbed layer of cationic dextran on the adsorption behavior was determined in electrolyte-free conditions using fluorescent double staining techniques. The preadsorbed cationic dextran had almost no effect on the adsorption of low molecular mass fractions. Low molecular mass fractions directly adsorbed into the pore structure, as opposed to adsorbing to a free surface and diffusing into the pores. It was also shown that cationic dextran can be selectively adsorbed to different locations, such that the surface of a porous substrate can be treated uniquely from the bulk.