In this work a model was developed that allows to understand the behavior of a chirped fiber Bragg grating for the detection and characterization of cracks in materials. In addition to the amplitude response, we show that the group delay of the grating provides useful information for the characterization of the crack. The position of the crack can be determined thanks to the linear chirp of the grating that fixes a correlation between the spatial position and both, the wavelength and the group delay. However, our analysis shows that this simple approach has a source of error, which can be overcome if a controllable external strain can be applied to the embedded grating, additional to the strain generated by the embedding process. Thus, the width of the crack can be also estimated. The effect of the appearance of a crack on the grating generates simple o multiple transmission peaks that are analysed considering the behavior of a Fabry-Perot fiber cavity. This simple model was experimentally tested and preliminary results were in good agreement with the simulations.

In this work two fiber optic sensing techniques are used to study the dimensional stability in fresh state of different cementitious materials. A conventional Portland cement mortar and two commercial grouts were selected. The measurements were performed by using a Bragg grating embedded in the material and a non-contact Fizeau interferometer. The first technique was applied in a horizontal sample scheme, and the second one, by using a vertical configuration. In addition, a mechanical length comparator was used in the first case in order to compare the results. The evolution with time of the dimensional changes of the samples and the analysis of the observed behavior are included.

No abstract