Zinc oxide (ZnO) nanorods were fabricated through hydrothermal route and employed for the adsorption of Cr(VI) ions from aqueous medium. Zinc nitrate hexahydrate (Zn(NO3)2.6H2O) was used as a zinc precursor and Triton-x 100 was used as a capping agent. As synthesized ZnO nanorods were characterized by UV-visible spectroscopy (UV), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and energy dispersive X-Ray spectroscopy (EDX) techniques. The adsorption affecting parameters were investigated for maximum adsorption of Cr(VI) onto ZnO nanorods. The adsorption kinetics, isotherms, and thermodynamics were applied for adsorption mechanism evaluation. Maximum adsorption of Cr(VI) ions (250 mg/g) was achieved using 0.055 g/L ZnO dose at pH 2.0 for the contact time of 30 min. Pseudo-second-order kinetic model and Langmuir isotherm explained well the Cr(VI) adsorption onto ZnO nanorods. The Cr(VI) adsorption onto ZnO was spontaneous and endothermic in nature. In view of promising adsorption efficiency, ZnO nanorods could possibly be used for Cr(VI) ions removal from wastewater and also extendable for the adsorption of other heavy metals ions.

The nanoparticles have been prepared and employed as excellent adsorbents for the sequestration of heavy metal ions and hazardous impurities from the aqueous media. The surface morphological, textural and structural properties of nanoparticles have been modified, which are capable and potentially useful for the remediation of metal ions. Several metals (oxides, doped, nanocomposites of Fe, Ti, Zn, SiO2, SiC, Mo, Co, Ni, Zr, Mn, Si, S, Al, Cu, Ce, graphene, CNTs) were reported an efficient adsorbents for the removal of lead (Pb) ions from aqueous media and polluted water. The present review focuses on different kinds of nanoparticles such as metal oxides, carbon based and host supported employed for removal of Pb ions under varying experimental conditions such as pH, temperature, contact time and concentrations. The preparation strategies, physicochemical properties and adsorption are also discussed. Based on studies, it was found that the smart materials are affective adsorbents for the purification of wastewater containing Pb ions and could possibly extended for the remediation of other heavy metal ions.

A bench-scale beneficiation study was performed on low-grade complex lead-zinc ore of Duddar area, District Lasbela, Balochistan Province, Pakistan. The polymetallic ore under investigation contains galena and sphalerite as valuable minerals of lead and zinc. The low-grade ore was upgraded by selective sequential froth flotation technology to recover both minerals. An effort was made to investigate the effect of important variables on grade and recovery of concentrates and to design the process flow sheet. Different parameters of flotation process such as particle size of the feed, pH and % solids of the pulp, speed of impeller, type of reagents (collectors, frothers, regulators and modifiers) and their quantities, conditioning time and flotation time were optimized to attain maximum grade and recovery of respective concentrates. The rougher concentrates obtained were subjected to one regrinding and two cleaning operations to achieve higher-grade concentrates of both metals. Bench-scale flotation tests show that it is possible to obtain a lead concentrate assaying 65.24% Pb with recovery rate of 81.32% and a zinc concentrate containing 55.63% Zn content with recovery rate of 80.28%. Both the concentrates meet the specifications required for metallurgical and chemical grades.