is an open access repository that collects the work of Arts et Métiers ParisTech researchers and makes it freely available over the web where possible. During forging and machining manufacturing processes, the material is subject to large strains at high strain rates which provoke local heating and microstructural changes. Modelling of these phenomena requires precise knowledge of the stress-strain constitutive equations for a large range of strains, strain rates and temperatures. An experimental study of the rheology of both hyper-and hypo-eutectoid steels (with different microstructures) over a temperature range from 20 1C to 1000 1C and with strain rates from 10 À2 to 10 5 s À1 has been undertaken. These tests were performed in compression on cylindrical specimens and in shear using hat-shaped specimens. Both a GLEEBLE 3500 thermomechanical testing machine and a Split-Hopkinson Pressure Bar apparatus were used. From these tests, three deformation domains have been identified as a function of the material behaviour and of the changes in the deformed microstructure. Each domain was characterized by its behaviour, including the competition between hardening and softening, strain rate sensitivity on the flow stress and the softening phenomenon (i.e. recrystallisation or recovery, etc.). Finally, based on thermodynamical considerations, the conditions of thermoplastic instability (i.e. shear bands, twinning, heterogeneities, etc.) and microstructural changes are highlighted using process maps of the dissipated power repartition.

is an open access repository that collects the work of Arts et Métiers ParisTech researchers and makes it freely available over the web where possible. a b s t r a c t A review of the different phenomenological thermo-viscoplastic constitutive models often applied to forging and machining processes is presented. Several of the most common models have been identified using a large experimental database (Hor et al., 2013). The latter consists of the tests were done in compression on cylindrical shaped specimens and in shear using hat-shaped specimens. The comparison between these different models is shown that the group of decoupled empirical constitutive models (e.g. the Johnson and Cook (1983) model), despite their simple identification procedures, are relatively limited, especially over a large range of strain rates and temperatures. Recent studies have led to the proposal of coupled empirical models. Three models in this class have also been studied. The Lurdos (2008) model shows the best accuracy but requires a large experimental database to identify its high number of parameters. After this comparison, a constitutive equation is proposed by modifying the TANH model (Calamaz et al., 2010). Coupling between the effects of strain rate and temperature is introduced. This model is easier to identify and does not require knowledge of the saturation stress. Compared to other models, it better reproduces the experimental results especially in the semi-hot and hot domains. In order to study real machining conditions, an orthogonal cutting tests is considered. The comparison between experimental test results and numerical simulations conducted using the previously identified constitutive models shows that the decoupled empirical models are not capable of reproducing the experimental observations. However, the coupled constitutive models, that take into account softening, improve the accuracy of these simulations.