No abstract

The formation and growth of a DDR zeolite membrane was developed on the low cost indigenous clayalumina substrate for separation of H 2 from H 2 -CO 2 mixture by selective deposition of oriented seed crystals, followed by secondary growth method with sonication mediated hydrothermal technique. The formation of free radicals by ultrasonic irradiation in the sonochemical method enhances the rate of nucleation which ultimately reduces the DDR zeolite crystallization time. Surface seeding not only accelerates the zeolite crystallization on the support surface but also enhances the formation of an homogenous zeolite membrane layer. The DDR seeds were synthesized by a sonication mediated hydrothermal technique within a short crystallization time i.e. 2 days and used to provide nucleation for the membrane growth. Accordingly DDR zeolite membranes were synthesized on seeded substrate within 5 days. The membrane thickness was found to be $26 mm. The synthesized membranes along with seed crystals were characterized by XRD, FTIR, FESEM and EDAX analysis. The performance of the membrane formed was evaluated by single gas as well as mixture gas permeation measurement for H 2 and CO 2 . The H 2 -CO 2 separation selectivity of the membrane increased up to 3.7 at room temperature which is more than the reported values. To the best of our knowledge, there is no report on the synthesis of a DDR zeolite membrane within 7 (2 days for seed crystal and 5 days for membrane synthesis) days by a secondary growth technique.

No abstract

In this work, DDR zeolites were synthesized by sonochemical method without the application of any heat energy at room temperature. The synthesized zeolites were characterized by X‐ray diffraction (XRD), infrared (IR) spectral analysis, and field‐emission scanning electron microscopy (FESEM). XRD and IR results showed that phase pure DDR zeolite was started to form at room temperature after 24 h of aging and completed the formation after 5 d of aging. The Brunauer–Emmett–Teller (BET) surface area of the powder was found to be 202 m2/g. The FESEM micrograph and elemental analysis showed that desired atomic ratio of the DDR zeolite was obtained after 5 days of synthesis.

We studied localized surface plasmon resonances (LSPR) at different compositions, substrate temperatures, and mass thicknesses of Ag-Au alloy nanoparticle films grown by sequential pulsed laser deposition. The LSPRs were pronounced at all compositions of the films grown at high substrate temperature of about 300 °C as compared to those grown at room temperature. The alloy formation and composition of the films were determined using X-ray photoelectron and energy dispersive spectroscopy. Films' mass thickness and compositional uniformity along the thickness were determined using X-ray reflectometry and secondary ion mass spectroscopy. Atomic force microscopic analysis revealed the formation of densely packed nanoparticles of increasing size with the number of laser ablation pulses. The LSPR wavelength red shifted with increasing either Au percentage or film mass thickness and corresponding LSPR tuning was obtained in the range of 450 to 690 nm. The alloy dielectric functions obtained from three different models were compared and the optical responses of the nanoparticle films were calculated from modified Yamaguchi effective medium theory. The tuning of LSPR was found to be due to combined effect of change in intrinsic and extrinsic parameters mainly the composition, morphology, particle-particle, and particle-substrate interactions.