[1] The NASA Discovery Moon Mineralogy Mapper imaging spectrometer was selected to pursue a wide range of science objectives requiring measurement of composition at fine spatial scales over the full lunar surface. To pursue these objectives, a broad spectral range imaging spectrometer with high uniformity and high signal-to-noise ratio capable of measuring compositionally diagnostic spectral absorption features from a wide variety of known and possible lunar materials was required. For this purpose the Moon Mineralogy Mapper imaging spectrometer was designed and developed that measures the spectral range from 430 to 3000 nm with 10 nm spectral sampling through a 24 degree field of view with 0.7 milliradian spatial sampling. The instrument has a signal-to-noise ratio of greater than 400 for the specified equatorial reference radiance and greater than 100 for the polar reference radiance. The spectral cross-track uniformity is >90% and spectral instantaneous field-of-view uniformity is >90%. The Moon Mineralogy Mapper was launched on Chandrayaan-1 on the 22nd of October. On the 18th of November 2008 the Moon Mineralogy Mapper was turned on and collected a first light data set within 24 h. During this early checkout period and throughout the mission the spacecraft thermal environment and orbital parameters varied more than expected and placed operational and data quality constraints on the measurements. On the 29th of August 2009, spacecraft communication was lost. Over the course of the flight mission 1542 downlinked data sets were acquired that provide coverage of more than 95% of the lunar surface. An end-to-end science data calibration system was developed and all measurements have been passed through this system and delivered to the Planetary Data System (PDS.NASA.GOV). An extensive effort has been undertaken by the science team to validate the Moon Mineralogy Mapper science measurements in the context of the mission objectives. A focused spectral, radiometric, spatial, and uniformity validation effort has been pursued

[1] High-resolution images from Chandrayaan-1 Terrain Mapping Camera and Lunar Reconnaissance Orbiter Camera reveal landslides and gully formation on the interior wall of a 7 km-diameter simple crater emplaced in Schrödinger basin on the farside of the Moon. These features occur on the steep upper crater wall, where the slope is ~35. The gullies show a typical alcove-channel-fan morphology. Some gullies incise bedrock, where impact-related faults are present. Slope failure along the concentric faults also led to formation of landslides. Dark slope streaks are abundant at the bright gully regions, especially near the fan and channel deposits. Spectral characteristics inferred from data obtained by Hyperspectral Imager and Moon Mineralogy Mapper on board Chandrayaan-1 show that the gullies and landslides are characterized by high optical immaturity and devoid of prominent spectral absorption features related to water or hydroxyl molecules, suggesting youthful dry-granular flows. Mass movements on the crater wall led to the formation of arcuate ridges and ponding of fine-grained sediments on the crater floor. Runout flows from small impact craters on the slopes indicate that impact-induced seismic shaking was responsible for the downslope mass movements. Crater size-frequency distributions suggest a minimum age of 18-2 Ma for the gullies and 2 Ma for the landslides, while age of the host crater ejecta was inferred to be about 175 Ma. The gullies and landslides also occur on the interior wall of other impact craters elsewhere on the Moon and probably formed by similar processes.

Impact fragmentation is an energetic process that has affected all planetary bodies. To understand its effects in basalt, we studied Lonar Crater, which is a rare terrestrial simple impact crater in basalt and analogues to kilometer-scale simple craters on Mars. The Lonar ejecta consists of basaltic fragments with sizes ranging from silt to boulder. The cumulative size and mass frequency distributions of these fragments show variation of power index for different size ranges, suggesting simple and complex fragmentation. The general shape of the fragments is compact, platy, bladed, and elongated with an average edge angle of 100°. The size distribution of cobble-to boulder-sized fragments is similar to the fracture spacing distribution in the upper crater wall, indicating the provenance of those large fragments. Its consistency with a theoretical spallation model suggests that the large fragments were ejected from near surface of the target, whereas the small fragments from deeper level. The petrophysical properties of the ejecta fragments reflect the geophysical heterogeneity in the target basalt that significantly reduced the original size of spall fragments. The presence of Fe/Mg phyllosilicates (smectites) both in the ejecta and wall indicates the role of impact in excavating the phyllosilicates from the interior of basaltic target affected by aqueous alteration. The seismic images reveal a thickness variation in the ejecta blanket, segregation of boulders, fractures, and faults in the bedrock beneath the crater rim. The fracturing, fragmentation, and fluvial degradation of Lonar Crater have important implications for Mars.