No abstract

Frequency-domain photothermal radiometry (FD-PTR or PTR) is used to detect mechanical holes and demineralized enamel in the interproximal contact area of extracted human teeth. Thirty-four teeth are used in a series of experiments. Preliminary tests to detect mechanical holes created by dental burs and 37% phosphoric acid etching for 20 s on the interproximal contact points show distinct differences in the signal. Interproximal contact areas are demineralized by using a partially saturated acidic buffer system. Each sample pair is examined with PTR before and after micromachining or treating at sequential treatment periods spanning 6 h to 30 days. Dental bitewing radiographs showed no sign of demineralized lesion even for samples treated for 30 days. Microcomputer tomography (micro-CT), transverse microradiography (TMR), and scanning electron microscopy (SEM) analyses are performed. Although micro-CT and TMR measured mineral losses and lesion depths, only SEM surface images showed visible signs of treatment because of the minimal extent of the demineralization. However, the PTR amplitude increased by more than 300% after 80 h of treatment. Therefore, PTR is shown to have sufficient contrast for the detection of very early interproximal demineralized lesions. The technique further exhibits excellent signal reproducibility and consistent signal changes in the presence of interproximal demineralized lesions, attributes that could lead to PTR as a reliable probe to detect early interproximal demineralization lesions. Modulated luminescence is also measured simultaneously, but it shows a lower ability than PTR to detect these interproximal demineralized lesions.

Artificially created demineralized and remineralized carious lesions on the root and enamel of human teeth were examined by photothermal radiometry (PTR) and modulated luminescence (LUM). Fourteen extracted human teeth were used and a lesion was created on a 1 mmx4 mm rectangular window, spanning root to enamel, using a lactic acid-based acidified gel to demineralize the tooth surface. The lesion was then exposed to a remineralization solution. Each sample was examined with PTR/LUM on the root and enamel before and after treatment at times from 1 to 10 (5 on root) days of demineralization and 2 to 10 days of remineralization. Ten-day (5 on root) demineralized samples were remineralized. After completing all the experiments, transverse microradiography (TMR) analysis was performed to compare and correlate the PTR/LUM signals to the depth of lesions and mineral losses. The PTR and LUM amplitudes and phases showed gradual and consistent changes with treatment time. In this study, TMR showed good correlation coefficients with PTR and LUM. It was also found that the length of the treatment time did not correlate very well to any technique, PTR/LUM or TMR, which implies a significant degree of inhomogeneity of the demireralization and remineralization rates in each and every tooth.

The thermal diffusivity and effective infrared emissivity of water-methanol mixtures were measured at atmospheric pressure and ambient temperature using a pyroelectric thermal-wave resonator cavity. The applied frequency-scan method allows keeping the cavity length fixed, which eliminates instrumental errors and substantially improves the precision and accuracy of the measurements. A theoretical model describing conduction and radiation heat transfer in the cavity was developed. The model predictions and the frequency-scan experimental data were compared, showing excellent agreement. The measurements were performed for methanol volume fractions of 0, 0.5, 1, 2, 5, 10, 20, 40, 75, and 100%. The fitted thermal diffusivity and effective emissivity vs. concentration results of the mixtures were compared to literature theoretical and experimental data. The maximum resolution of 0.5% by volume of methanol in water by means of the thermal-wave cavity method is the highest reported to date using thermophysical techniques. Semi-empirical expressions for the mixture thermal diffusivity and infrared emissivity as functions of methanol concentration have been introduced. The expression for infrared emissivity is consistent with the physical principle of detailed balance (Kirchhoff's law). The expression for thermal diffusivity was found to describe the data satisfactorily over the entire methanol volume-fraction range.

Noninvasive dental diagnostics is a growing discipline since it has been established that early detection and quantification of tooth mineral loss can reverse caries lesions in their incipient state. A theoretical coupled diffuse photon density and thermal-wave model was developed and applied to photothermal radiometric frequency responses, fitted to experimental data using a multiparameter simplex downhill minimization algorithm for the extraction of optothermophysical properties from artificially demineralized human enamel. The aim of this study was to evaluate the reliability and robustness of the advanced fitting algorithm. The results showed a select group of optical and thermal transport parameters and thicknesses were reliably extracted from the computational fitting algorithm. Theoretically derived thicknesses were accurately predicted, within about 20% error, while the estimated error in the optical and thermal property evaluation was within the values determined from early studies using destructive analyses. The high fidelity of the theoretical model illustrates its efficacy, reliability, and applicability toward the nondestructive characterization of depthwise inhomogeneous sound enamel and complex enamel caries lesions.