In many urban areas, residential wood burning is a significant wintertime source of PM2.5. In this study, we used a combination of fixed and mobile monitoring along with a novel spatial buffering procedure to estimate the spatial patterns of woodsmoke. Two-week average PM2.5 and levoglucosan (a marker for wood smoke) concentrations were concurrently measured at upto seven sites in the study region. In addition, pre-selected routes spanning the major population areas in and around Vancouver, B.C. were traversed during 19 cold, clear winter evenings from November, 2004 to March, 2005 by a vehicle equipped with GPS receiver and a nephelometer. Fifteen-second-average values of light scattering coefficient (bsp) were adjusted for variations between evenings and then combined into a single, highly resolved map of nighttime winter bsp levels. A relatively simple but robust (R(2) = 0.64) land use regression model was developed using selected spatial covariates to predict these temporally adjusted bsp values. The bsp values predicted by this model were also correlated with the measured average levoglucosan concentrations at our fixed site locations (R(2) = 0.66). This model, the first application of land use regression for woodsmoke, enabled the identification and prediction of previously unrecognized high woodsmoke regions within an urban airshed.

The purpose of this paper is to demonstrate how to develop an air pollution monitoring network to characterize small-area spatial contrasts in ambient air pollution concentrations. Using residential woodburning emissions as our case study, this paper reports on the first three stages of a four-stage protocol to measure, estimate, and validate ambient residential woodsmoke emissions in Vancouver, British Columbia. The first step is to develop an initial winter nighttime woodsmoke emissions surface using inverse-distance weighting of emissions information from consumer woodburning surveys and property assessment data. Second, fireplace density and a compound topographic index based on hydrological flow regimes are used to enhance the emissions surface. Third, the spatial variation of the surface is used in a location-allocation algorithm to design a network of samplers for the woodsmoke tracer compound levoglucosan and fine particulate matter. Measurements at these network sites are then used in the fourth stage of the protocol (not presented here): a mobile sampling campaign aimed at developing a high-resolution surface of woodsmoke concentrations for exposure assignment in health effects studies. Overall the results show that relatively simple data inputs and spatial analysis can be effective in capturing the spatial variability of ambient air pollution emissions and concentrations.

No abstract