Considering the tribology design theory of arbitrary intersecting line gear (AILG) is still a blank, the equivalent ellipsoid model of contact area of the AILG pair was built and then improved by 3 modification methods of line teeth profile. Based on the improved model, semiquantitative analyses of the relationship between the parameters of the AILG and the ratio of principal curvature radii of equivalent ellipsoid R x /R y were presented, and design criteria for the parameters of AILG based on elastohydrodynamic (EHL) point contact model were proposed. The results of the theoretical calculation and the optical EHL experiment proved that the modifications of teeth profile and the parameters design criteria for the AILG are conducive to improving its EHL performance.

Plasma's conductive and dielectric properties have been well known for decades. Plasma antenna is a general terms representing using plasma as a conductive medium to transmit or reflect signals. It has unique properties like low RCS (radar cross section), variable impedance and instant on-off capability. Previous plasma antenna uses RF power to generate the plasma column. We developed AC-biased (alternating current) plasma antenna, which has larger operation frequency scale and lower sustaining power. Signals propagated are coupled into the plasma antenna via capacitive coupling. Impedance of the plasma shifts slightly with the AC current. Radiation pattern of the plasma antenna is less uniform than metal antenna and its gain is related to AC power, from the measuring results of AC-biased plasma antenna we found its advantages compare to the plasma antenna excited by the surface wave.

Based on the elastohydrodynamic lubrication (EHL) theory, design methodologies are proposed aiming to improve the EHL state of the vertical skewed line gear (VSLG) in this article. First of all, the parametric equations of the driving and driven VSLG surfaces are established and then converted into equivalent Hertz contact model. Then, the influences of the design parameters of the VSLG on the ellipticity are analyzed by its equivalent Hertz contact model. Finally, the parameter design method for improving the EHL state of VSLG is deduced. The results of optical elastohydrodynamic experiment and simulation experiment indicate that the parameter design method is effective for the formation of EHL film without changing the kinematic characteristics of VSLG. In short, this paper provides reliable and convenient parameter design methods for VSLG in consideration of EHL.