While direct laser desorption ionization of soluble polyaniline dried onto metal sample plates results in mass spectra that are similar to previously shown electrospray ionization data of similar samples, laser desorption of unsolubilized solid polyaniline results in major fragmentation of the phenyl rings. Solventless MALDI, a recently developed technique for insoluble or slightly soluble species, involves the use of only solid analyte and matrix during sample preparation. Solventless MALDI of solid polyaniline results in mass spectra that are similar to the direct laser desorption ionization spectra of the soluble oligomers with some larger molecular weight oligomers also being detected. Based on the matrix used, different series of polyaniline with dissimilar end groups are detected. The matrix also affects the percentages of benzenoid and quinoid units in the oligomers. Thus, solventless MALDI appears to be a promising new technique for the mass spectrometric analysis of low solubility, but industrially important, polyanilines.

No abstract

No abstract

No abstract

As miniaturization of electrospray continues to become more prevalent in the mass spectrometry arsenal, numerous types of conductive coatings have been developed with miniaturized electrospray emitters. Different conductive coatings have different properties that may lead to differences in analytical performance. This paper investigates and compares the analytical properties of a series of applied conductive coatings for low-flow electrospray ionization developed in this laboratory vs. commercially-available types. Evaporated graphite is thoroughly compared with commercially available polyaniline (PANI) coated emitters and metal coated emitters. Each set of emitters was investigated to determine various performance characteristics, including susceptibility to electrical discharge in both positive and negative ionization modes, as well as emitter reproducibility and generation of a standard curve to determine each emitter coating's limit of detection and limit of quantitation. Furthermore, evaporated graphite and polyaniline coated fused silica capillaries were investigated to determine which coating is more stable over long-term analyses and during electrical discharge.