In this study, bauxite residue was directly leached using the Brønsted acidic ionic liquid 1-ethyl-3-methylimidazolium hydrogensulfate. Stirring rate, retention time, temperature, and pulp density have been studied in detail as the parameters that affect the leaching process. Their optimized combination has shown high recovery yields of Sc, nearly 80%, and Ti (90%), almost total dissolution of Fe, while Al and Na were partially extracted in the range of 30-40%. Si and rare earth element (REEs) dissolutions were found to be negligible, whereas Ca was dissolved and reprecipitated as CaSO 4 . The solid residue after leaching was fully characterized, providing explanations for the destiny of REEs that remain undissolved during the leaching process. The solid residue produced after dissolution can be further treated to extract REEs, while the leachate can be subjected to metal recovery processes (i.e., liquid-liquid extraction) to extract metals and regenerate ionic liquid. been listed as a critical raw material by the European Commission due to its high economic importance and supply risk [11]. In fact, Sc is mainly produced as a byproduct during the processing of various ores, from titanium and REEs ores (China), uranium ore (Kazakhstan and Ukraine), and apatite ore (Russia). It can also be recovered from previously processed tailings or residues [9,12,13]. For these reasons, BR can be accounted as a secondary raw material source [14], and the recovery of Sc could represent a high economic interest.BR can also be considered a secondary source for Ti, which is a photocatalyst and it is applied in the white pigment industry [15]. Since the availabilities and qualities of Ti ores are decreasing [16], it is important to find methods for extracting Ti from secondary sources.Many studies, patents, and pilot scale implementations have been carried out for Sc and Ti recovery from BR, mainly by investigating hydrometallurgical or combined pyro-hydrometallurgical processes [5,12,[16][17][18][19][20][21][22][23], but none of them has reached an industrial scale. Nowadays, the impact of the zero-waste valorization policy motivates the research community on finding innovative, greener, and economical viable routes for metal extraction from complex polymetallic matrices, such as the bauxite residue [24].Ionometallurgical approach can be exploited as an alternative to conventional hydrometallurgical processing. The term ionometallurgy indicates the use of ionic liquids (ILs) as solvents in metals processing. ILs are liquid at room temperature and consist solely of ions; generally an organic cation and inorganic/organic anion. ILs have superior properties against conventional organic solvents, such as nonflammability, a wide electrochemical window, high thermal stability, negligible vapor pressure, and low volatility [25]. For these reasons and thanks to the vast number of combinations of the cation and the anion during synthesis, ILs have potential for many applications, such as solvent extraction [26,27], catalytic reactions [28,...