The market dynamics, and their impact on a future circular economy for lithium-ion batteries (LIB), are presented in this roadmap, with safety as an integral consideration throughout the life cycle. At the point of end-of-life, there is a range of potential options – remanufacturing, reuse and recycling. Diagnostics play a significant role in evaluating the state of health and condition of batteries, and improvements to diagnostic techniques are evaluated. At present, manual disassembly dominates end-of-life disposal, however, given the volumes of future batteries that are to be anticipated, automated approaches to the dismantling of end-of-life battery packs will be key. The first stage in recycling after the removal of the cells is the initial cell-breaking or opening step. Approaches to this are reviewed, contrasting shredding and cell disassembly as two alternative approaches. Design for recycling is one approach that could assist in easier disassembly of cells, and new approaches to cell design that could enable the circular economy of LIBs are reviewed. After disassembly, subsequent separation of the black mass is performed before further concentration of components. There are a plethora of alternative approaches for recovering materials; this roadmap sets out the future directions for a range of approaches including pyrometallurgy, hydrometallurgy, short-loop, direct, and the biological recovery of LIB materials. Furthermore, anode, lithium, electrolyte, binder and plastics recovery are considered in the range of approaches in order to maximise the proportion of materials recovered, minimise waste and point the way towards zero-waste recycling. The life-cycle implications of a circular economy are discussed considering the overall system of LIB recycling, and also directly investigating the different recycling methods. The legal and regulatory perspectives are also considered. Finally, with a view to the future, approaches for next-generation battery chemistries and recycling are evaluated, identifying gaps for research.

The ever-increasing number of spent lithium-ion batteries (LIBs) has presented a serious waste-management challenge. Aluminium and copper current collectors are important components in LIBs and take up a weight percentage...

The recycling of lithium-ion batteries presents challenges due to the complex composition of waste streams generated by current processes. Achieving higher purity levels, particularly in the reclamation of aluminium metal and transition metal black mass, is essential for improved valorisation. In this study, we propose a high-efficiency, low-energy, and environmentally friendly method using organic acids to separate cathodic black mass from the aluminium current collector. The acids selected in this study all show >86% peeling efficiency with acetic acid showing 100% peeling efficiency of black mass from the current collector. The recovered materials were subjected to X-ray diffraction, electron microscopy, and elemental analysis techniques. We show that oxalic-acid-treated material exhibited two distinct active material components with a minimal change in mass ratio compared to the untreated material. We show by elemental analysis of the leachates that the majority of critical materials were retained in the black mass and limited aluminium was leached during the process, with almost 100% of Al recovery achieved. This methodology enables the production of high-purity concentrated aluminium and critical metal feedstocks (Mn, Co, Ni, and Li) for further hydro-metallurgical processes, upcycling of the cathode material, and direct recycling. The proposed approach offers significant potential for enhancing valorization in lithium-ion battery recycling, facilitating efficient separation and optimal recovery of valuable metals.